Part III: Setup
Setup Menu: Advanced Convergence, Transport Menu, and Language
Press INFO for help
Figure 1. Advanced Convergence screen
There are more than 64 line intersections, but the ashi ng br acket wi ll onl y st op at the 64 adjustment points.
Figure 2. Setup menu (Transport menu selected)
Advanced Convergence
(Figure 1)
After adjusting the Red Convergence and Blue Convergence, you can ne- tune your TV by adjusting the Red and Blue conver- gence at 64 individual points. Move the ashi ng br acket toa posi tion needi ng adj ust - ment by pressing 
, 
, 
, or 
. Press ENTER to select the position ( ashi ng wi ll stop). Move the Red or Blue line by press- ing 
, 
, 
, or 
. Press VIDEO to switch between the Red and Blue lines. A position is properly converged when all three lines combine to appear white. Press ENTER to deselect the position ( ashi ng will resume), and move the brackets to the next position needing adjustment. When completed, press MENU or HOME to save your changes, and exit the Advanced Con- vergence screen. Press INFO for detailed instructions and then press INFO or menu to return to the convergence screen.
Transport Menu
(Figure 2)
The Transport Menu is used by NetCom- mand™ to control VCRs, DVDs, IEEE 1394 AV Disc, digital VCRs, and similar devices. This menu can be turned off if you would rather not have it displayed. The transport buttons on the remote control will continue to operate. See the NetCommand Guide for further details.
Language
(Figure 2)
Display the
Advanced Convergence, Transport, and Language
45