Part III: Setup
Antenna Menu: Super Quick View™ (SQV™)
Figure 1. Antenna Menu
SQV (Super Quick View™)
Using The Menu Screen
(Figure 1)
SQV (Super Quick View™) allows you to put together a list of your favorite channels from
1Select the channel using the “Channel” option box or CHANNEL button.
2Use 
or 
to select the SQV
Memory Bank.
3Press ENTER to check mark the
memory bank.
4Repeat for additional channels or banks.
Removing SQV Channels
1Highlight the check marked box.
2Press ENTER to remove the check mark.
SQV (Super Quick View™)
Using The Remote Control
Viewing and changing SQV banks using the remote control:
1Press the SQV button.
2To change memory banks, press a number button within 5 seconds of pressing the SQV button.
3Press the SQV button repeatedly to cycle through the channels available in that bank.
Adding SQV channels using the remote con- trol:
1Use the CHANNEL or number buttons to select the channel you want to add to the current SQV memory bank.
2Press and hold the SQV button for
about 2 seconds. When “SQV” and the memory bank number appear under the channel number, the channel has suc- cessfully been added.
Removing SQV channels using the remote control:
1Press the SQV button repeatedly until you see the desired channel.
2While the channel number and SQV indicator (with correct bank number) are still displayed on the screen, press the CANCEL button. If the CANCEL button is not pressed before the SQV indicator disappears automatically, the channel will not be removed.
3When the SQV indicator disappears, the channel has successfully been removed only for that bank. Other banks remain unchanged.
Super Quick View™ (SQV™)
47