Hitachi DVP755U instruction manual Display Setting, Parental Control, Audio Setting

record-

AUDIO

DVD SETUP

Display Setting

This function allows you to change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player.

1Press SETUP in stop mode.

2Press sor Bto select CUSTOM, then press ENTER.

•CUSTOM mode will appear.

3Press sor Bto select DISPLAY, then press ENTER to confirm.

4Press Kor Lto select from the list below, then press ENTER.

	DISPLAY
TV ASPECT : QUICK	TV ASPECT	4:3 L-BOX
	LOGO	ON
	STILL MODE	AUTO
	PROGRESSIVE	OFF

• Press K or L for an item selec- tion, then press ENTER.

•4:3 LETTER BOX may display a theater-like image. Black bars may appear at the top and bottom of the screen, depending on the proportion of your TV screen.

•4:3 PAN-SCAN is the traditional TV mode with a full height picture with both sides adjusted.

•Select 16:9 WIDE if a wide-screen TV is connected to the DVD player.

•The default setting is 4:3 L-BOX (4:3 LETTER BOX).

STILL MODE :

•Press K or Lfor an item selection (AUTO, FIELD or FRAME), then press ENTER.

•Select AUTO usually.

•If you select FIELD, pictures in the still mode will be stabi- lized although they will be coarse due to limited amount of data.

•If you select FRAME, pictures in the still mode will be high- ly defined although they will be blurred due to output of two fields at the same time.

•The default setting is AUTO.

PROGRESSIVE : QUICK

DOWN SAMPLING :

•Set to ON when outputting in 48kHz .

•Set to OFF when outputting the original sound.

•The default setting is ON.

•When playing disc with copyright protection, the sound will be down sampled at 48kHz even if you set it to OFF.

•DOWN SAMPLING function is available only on digital out- put of a disc recorded in 96kHz, and when the unit is con- nected to another source using the digital out jack.

•DOWN SAMPLING function is available only on the discs recorded in the Dolby Digital format.

DOLBY DIGITAL : QUICK

•Set to BITSTREAM when the player is connected to Dolby Digital Decoder.

(BITSTREAM : Dolby Digital Output)

(PCM : Converts Dolby Digital to PCM)

•The default setting is BITSTREAM.

DTS: QUICK

•Set to BITSTREAM when connected to DTS decoder.

•The default setting is OFF.

5Press SETUP to exit.

Parental Control

Parental Control provides a limit for DVDs with extreme violence or adult themes (a password you establish will qive you the control). This function allows you to prevent discs with objectionable scenes from being played by your children.

RATING LEVEL

Rating Level allows you to set a viewing limit for DVDs. Playback will stop if the disc’s general ratings exceed the limit you set.

1Press SETUP in stop mode.

2Press s or B to select CUSTOM, then press ENTER.

3Press s or B to select PARENTAL, then press ENTER.

English

•Press ENTER for an item selection (ON or OFF), then press SETUP.

•If you selected ON, you will see “Activate progressive?” message on the screen.

•Select YES by pressing K or L, then ENTER. P. SCAN appears on the display panel. If you do not press any but- tons for 15 seconds, Progressive Scan will be switched to OFF.

•The default setting is OFF.

4Enter your four-digit password

then press ENTER.

5 Press K or L to select RATING LEVEL, then press ENTER.

6Press K or L to select

the desired level, then press ENTER.

7Press SETUP to exit.

NOTES:

PARENTAL
RATING LEVEL	ALL

CHANGE PASSWORD

NOTE:

•When PROGRESSIVE is on, video signals from the Player’s VIDEO OUT and S-VIDEO OUT jacks will be dis- torted or the screen will turn to black.

LOGO:

•Press ENTER to switch between ON (opening picture) and OFF (black).

•The default setting is ON.

5Press SETUP to exit.

NOTE:

•Be sure to press SETUP, or the setting will not work.

Audio Setting

Set your surround modes for DVD playback through your receiv- er or processor. DVD’s audio setup will not affect CD playback.

1In stop mode press SETUP.

2Press s or B to select CUSTOM, then press

ENTER.

•CUSTOM mode will appear.

3Press s or B to select AUDIO, then ENTER to confirm.

4 Press K or L to select an item, then press ENTER.

DRC (Dynamic Range Control) :	DRC	ON
	DOLBY DIGITAL	BITSTREAM
	DOWN SAMPLING ON
• DRC function compresses the range	DTS	OFF

of sound volume.

• DRC function is available only on the discs that are ed in the Dolby Digital format.

• The default setting is ON.

•When doing this for the first time, enter any 4 digits except for 4737. That number will be used as the password from the sec- ond time onward.

•To change the password, press K or L to select CHANGE PASSWORD, then press ENTER. Enter the four-digit pass- word, then press ENTER.

•With some DVDs, it may be difficult to find if they are com- patible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

•Record the password in case you forget it.

IF YOU FORGET THE PASSWORD

1Press 4, 7, 3, 7 at step 4.

•Password will be cleared and Parental Level will be set to ALL.

2Repeat steps 4-7 to re-establish the parental lock.

CONTROL LEVELS

•ALL

Parental lock is cancelled.

•Level 8

DVD software of any grade (adult/general/children) can be played back.

•Levels 7 to 2

Only DVD software intended for general use and children can be played back.

•Level 1

Only DVD software intended for children can be played back, and those intended for adult and general use will be prohibited.

– 15 – EN