Hitachi DVP755U instruction manual Hook UPS, Connecting to an Audio System, Audio OUT, Digital

HOOK UPS

NOTES:

•Connect the DVD player directly to a TV. If the VIDEO/AUDIO cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•Be sure to turn off all components in the system before connecting another component.

•Refer to the Instruction manuals for your TV, stereo system and any other components to be connected to the DVD Player.

•If your TV is compatible with progressive scanning (525p/480p), connect the TV to the COMPONENT VIDEO OUT jacks of the DVD player, and make sure the progressive scanning mode is selected.

Connecting to an Audio System

English

Method 1

Stereo system

Analog audio input jacks

LR

AUDIO

Audio cable

(supplied)

	(Analog)
This unit	AUDIO OUT

AUDIO OUT L

DIGITAL AUDIO OUT

COAXIAL R

Setting	SETUP > AUDIO menu >
Connection	DOLBY DIGITAL
Connecting to Stereo System.	PCM

* To complete these settings, refer to page 15.

Method 2

Dolby Digital decoder, DTS decoder,

MD deck or DAT deck

COAXIAL		Digital audio
		input jack
Audio Coaxial
Digital cable		AUDIO OUT	L
(commercially		DIGITAL AUDIO OUT
available)
DIGITAL		COAXIAL	R
AUDIO OUT
Setting		SETUP > AUDIO menu >
Connection	DOLBY DIGITAL			DTS
Connecting to a Dolby Digital		BITSTREAM		BITSTREAM
decoder or DTS decoder
Connecting to the other equipment (an		PCM		OFF
MD deck or DAT deck etc.) without
Dolby Digital decoder or DTS decoder.

* To complete these settings, refer to page 15.

NOTES:

•The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel sur- round sound as heard in the movie theaters.

•If output is Dolby Digital- or DTS-encoded audio, connect to a Dolby Digital or DTS decorder, and set “DOLBY DIGITAL” or “DTS” to “BITSTREAM” for audio output in the setup mode.

•Unless connected to a Dolby Digital or DTS decoder, set “DOLBY DIGITAL” to “PCM” or “DTS” to “OFF” for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

– 9 – EN