Vertical Size Adjustments
What can be done?
To adjust the vertical picture size.
Start up |
|
|
|
|
| ||
1. | Push the cursor key |
| or |
| to highlight 'V Size' (menu 1). | ||
|
| ||||||
2. | Press ENTER to activate (menu 2). | ||||||
3. | Push the cursor key |
|
| or |
|
| until the correct image height is obtained. (image 1). |
|
|
|
| ||||
Note:
-If the internal # pattern was selected, this pattern remains on the screen.
-If the genlocked pattern was selected, the external source will be displayed. A bar scale and a numeric indicator help to gauge the size adjustment.
menu 1
GEOMETRY
HPHASE RASTER SHIFT
LEFT SIDE CORRECTION
H SIZE
VLINEARITY V SIZE
BLANKING
Select with 
or then <ENTER> <EXIT> to return
Blanking Adjustments
What can be done?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A 0% on the bar scale indicates no blanking. The following blanking adjustment are available: Top, Bottom, left and right blanking.
Start Up
To start up the Blanking adjustments, follow the next procedure :
1.Push the cursor key 
or 
to highlight Blanking (menu 1).
2.Press ENTER to display the blanking menu (menu 2).
-If the internal # pattern was selected, this pattern remains on the screen.
-If the genlocked pattern was selected, the external source will be displayed.
GEOMETRY
HPHASE RASTER SHIFT
LEFT SIDE CORRECTION
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with 
or then <ENTER> <EXIT> to return
menu 1
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with 
or then <ENTER>
<EXIT> to return
menu 2
47