Memory Banks
What can be done?
The user has the possibility to create 8 different memory banks (formats) for each source. But, the maximum allowed quantity of memory banks for all sources together is 32.
The option to create different memory banks for the same source can be switched ON or OFF.
How to select Memory Banks?
1.Push the cursor key or 
to highlight 'Memory Banks' (menu 1).
2.Press ENTER to toggle between ON and OFF.
ON : different memory banks available.
OFF : only one memory bank available.
If different memory banks are available for a source and the memory bank option is toggled to OFF, only the first memory bank will be used to display the source.
COMMON SETTINGS |
|
DYNAMIC ASTIGMATISM |
|
GAMMA CORRECTIONS |
|
CRT RUN IN CYCLE |
|
CRT DRIVE MODE |
|
MEMORYBANKS : ON |
|
FLYBACK TURNOVER POINT |
|
MENU POSITION : STANDARD |
|
Select with or |
|
then <ENTER> |
|
<EXIT> to return | menu 1 |
|
How to create a new memory bank?
1.Select your source. The projector selects the last used memory bank.
2.Press ENTER
3.Push the corresponding digit (between 1 and 8) of a non existing memory bank. (The memory banks can be created in random order, e.g. first creating bank 5 and later bank 2.)
4.Make the necessary adjustments. When leaving the source, the new created memory bank will be saved for later use.
Example: When source 1, video 15.6 kHz /60Hz is create on bank 4 and the vertical frequency changes to 50Hz, the projector will create a new block (due to the vertical frequency change) with the same bank number 4.
How to recall a specific memorybank for the actual source?
When the memory bank option is ON and a source is selected, this source will be displayed with the last used memory bank settings.
An
1.Press ENTER to select the next memory bank in increasing order. or
2.Enter the number of the desired memory bank with the digit keys.
In both cases, the
SOURCE XX
MEMORY
BANK
4
74