Runco DTV-1200 owner manual Specifications

Page 89

SPECIFICATIONS

Scan Frequency:	Horizontal: 32-132 kHz, Vertical: 37-210 Hz
Optical Resolution:	HD-120 lenses, 12 line pairs per, mm, 1250 TV lines
Video Standards:	NTSC/PAL/SECAM
Video Resolution:	1250 TV lines
Retrace Time:	Horizontal: 1.8 uS, Vertical: 300 uS
Bandwidth:	180 MHz
CRTs:	9-inch, high definition, liquid coupled tubes with electromagnetic focus and color
	filters
Lenses:	Super high definition, fully color corrected F1.15 lenses
Inputs:	RGB/Component
Color Balance:	Four user selectable settings: 3200K, 5400K, 6500K, 9300K, and Custom
Input Memories:	32 separate memories with 8 memories per scan frequency
Internal Setup Pattern:	Crosshatch, Focus
Light Output:	1300 lumens/250 ANSI lumens
Picture Size:	90-300 in. (4:3) diagonal
Throw Distance:	1.43 x width (widescreen), 1.48 x width (standard 4:3)
Vertical Offset:	Maximum vertical offset = 5°
Configurations:	Front or rear, floor or ceiling mount
Aspect Ratios:	Anamorphic, widescreen, 4:3
Contrast Ratios:	100:1 (JIS Method). 20:1 (HDTV Method)
Convergence:	Digital zone convergence with 81 individual zones
Focus:	Digital focus with multiple zones
Power Requirements:	110 VAC, 50/60 Hz (220V International version)
Power Consumption:	800 W
Cabinet Dimensions:	Width: 26.77 in./680 mm
	Depth: 44.20 in./1123 mm
	Height: 14.25 in./362 mm (without feet), 15.33 in./389 mm (with feet)
Weight:	187 lbs./85 Kg.
Regulatory Approvals:	Complies with FCC Class "B", CE, C-Tick
Storage:	10-122° F (-12-50° C)
Operating Environment:	32-104° F (0-40° C)
Humidity:	0-90% non-condensing
Included Accessories:	Remote control, AC power cord and Owner's Operating Manual
Warranty:	Service Labor and Parts (except lamp): Runco warrants the product for one
	(1) year from the date of delivery to the end user.
	Lamp: 6 months or 1000 hours (which ever comes first).

87

Image 89

Contents DTV-1200 Page Table of Contents Page Page Safety Instructions Safety InstructionsPower cord with Ansi 73.11 plug Mains lead Power cord with CEE 7 plugPage Page Limited Warranty Effective Warranty Date Connections Power Connection to ProjectorSource No Projector Input Remote Button No Source ConnectionsInput Select Input RGB Source to InputRGB Source with Composite Sync to Input 4/5 RS-232 Connection RGB Source with Tri-level Sync to Input 4/5Component Source to Input 4/5 Getting Started Remote Control & Local KeypadAudio controls not used Projector Warm UP Stationary Image WarningFront of projector Remote Commands to the ProjectorProjector Address Input Selection via the Remote Color Saturation Control Not used on the DTV-1200 Brightness ControlContrast Control Adjustment Mode Start UP of the Adjustment ModeMain Menu Main MenuImage Control Color AdjustFormat Select Compose Eye-Q Touch Up Eye-Q ControlEye-Q Auto Converge Main Menu Adjustment ModeService Menus Entering the Service MenusEnter Password Random Access Random Access Adjustment ModeRandom Access Adjustment Mode Selecting Setup Pattern VGA Internal Cross Hatch PatternPicture Tuning Random Access Adjustment Mode Selection MenuRandom Access Adjustment Mode Picture TuningPicture Tuning Color Balance Gain adjustment affects the brightest areas of the imageColor Balance Color BalanceColor Balance Sync Fast/Slow AdjustmentsPicture Tuning Piture Tuning Clamp TuningPeaking PeakingHorizontal Phase Adjustments Geometry AdjustmentsRandom Access Adjustment Mode GeometryPhase Raster Shift AdjustmentsForbidden Area Left-Right East-West AdjustmentsProjected Raster CRT Faceplate Border Phosphor Coarse ShiftLEFT-RIGHT What can be done? Left Side CorrectionStart up Left Side CorrectionGeometry Top-Bottom North-South AdjustmentsTOP-BOTTOM N-S TOP-BOTTOM N-STOP BOW TOP Keystone Bottom BOW Bottom Keystone TOP-BOTTOMSize Horizontal Size AdjustmentsLinearity Vertical Linearity AdjustmentsLinearity V Size Blanking Adjustments Vertical Size AdjustmentsBlanking BlankingCorrect by pushing the cursor keys up or down Converge Adjustment Convergence AdjustmentsConvergence ConvergenceFocusing FocusingFocusing MidpointLeft TOPBottom Right Color SelectBlue on Source Color SelectService Mode Service ModeRandom Access Installation Service ModeSoftware version Configuration Projector SetupIdentification Text ON/OFFProjector SET-UP Run TimeIdentification RUN TimeChange Password Change PasswordPassword Change PasswordChange Baud Rate Change Projector AddressProjector SET-UP Projector Address Baud RateProjector Warm UP Projector Warm UpWarm Up On/Off Projector Warm UP Warm Up FrequencyProjector Warm Up Time Common Address Power Up ModeMemory Management Copy ModeCopy a Block Memory ManagementDeletion of Blocks Delete ModeDeleting Block by Block Deletion of All BlocksCovergence Mid Set to MidpositionDelete ALL Blocks SET to MidpositionConvergence MID Undo R & B Convergence MidSET to Midposition Green Convergence MIDUndo Focus to Midposition Undo Green Convergence MidFocus to Midposition East-West to Midposition North-South Settings to MidpositionUndo East-West to Midposition To MidpositionDigital Vertical Linearity to Midposition Undo North-South Settings to MidpositionUndo Digital Vertical Linearity to Midposition DIG Vert Linearity MIDUndo Digital Horizontal Linearity to Midposition Digital Horizontal Linearity to MidpositionAstigmatism to Midposition DIG HOR Linearity MIDUndo Astigmatism to Midposition All Settings to MidpositionUndo All Settings to Midposition Dynamic Astigmatism Common SettingsCommon Settings Green Dynamic AstigmatismGamma Corrections Common SettingsCRT Run In Cycle CRT RUN in CycleCRT Drive Mode CRT Drive ModeCRT Drive Mode Memory Banks Flyback Turnover Point Flyback Turnover PointMenu Position Voltage Diagnostics 12C DiagnosticsI2C Diagnostics DecoderProjector Diagnostics Projector DiagnosticsProjector Diagnostics Voltage DiagnosticsProgrammable Function Keys Phase Raster ShiftProgrammable Function Keys MESSAGES, Warnings and Failures Failure Adjustment Blocks Memory Blocks Adjustment Blocks and Source NumbersSource Numbers Block Header Example of Block HeaderSource input Source number Block header a RS-232 Codes Page TD = Throw Distance Factors CEILING/FLOOR ConfigurationBottom View DimensionsSide View Front ViewSpecifications Page RUMA-009450 rev