ON-SCREEN MENU OPERATION
SETUP (CONTINUED)
ENERGY SAVER
Energy saver settings control the LCD backlight bright- ness to save power consumption.
The higher the level number, the more brightness reduction and higher power saving.
CLOCK TIMER
Set the Current Time for your HDTV. You may also set a Switch on Time to use with the On Timer Function.
When On Timer Function is set to ON, the TV will auto- matically turn on at the previously set Switch on Time.
LIGHT SENSOR
This feature detects ambient room light brightness and uses it to control the panel brightness and picture parameters to reduce TV power consumption.
NOTE: When room lighting is dark, the panel brightness and/or the picture setting parameters such as bright- ness and cotrast are lowered. When room lighting is bright, parameters are affected opposite.
ENERGY SAVER SCREEN
CLOCK TIMER SCREEN
PANEL PROTECTION
Displaying a still picture for a long time may cause an “afterimage” or “ghost” on the screen. To help avoid this situation, use the Picture Rotation function.
If an afterimage occurs, use the White Pattern feature immediately to repair the panel. The more severe the afterimage, the longer the curing process may take. The default
NOTE: The sooner you remove a still picture and activate White Pattern, the more likely it is that the panel can be repaired.
Exit the White Pattern blank screen by pressing any button on the remote control (except VOLUME, AUDIO or MUTE)
14 Need help? 
www.sanyoctv.com 