STAND REMOVAL AND WALL MOUNTING (OPTIONAL)
Tools Needed: Phillips screwdriver No. 3
IMPORTANT NOTE:
Place HDTV face down on a padded or cushioned surface that is larger than the screen size to pro- tect the screen and finish. Handling by more than two people is recommended.
Wall mounting of the HDTV must be performed by a skilled person.
1 Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw.
2 Carefully remove the stand.
GETTING STARTED
BATTERY INSTALLATION
Install batteries in the remote control ( 2 “AAA”, not included)
PRECAUTIONS
To ensure safe operation, please observe the following precautions:
•Replace both batteries at the same time. Do not use a new battery with a used battery.
•There’s a risk of explosion if a battery is replaced by an incorrect type.
•Do not expose the Remote Control unit to moisture or heat.
•Be sure to match the “+” and
3Use the screws that are threaded into four (4) of the six (6) inserts on the back of your Plasma HDTV to secure it to a wall mounting kit (not included.)
UNIVERSAL standard interface: 480 x 200 and 480 x 360
Mounting screws measurements:
M6 Diameter,
ANTENNA CONNECTION FOR OFF-AIR SIGNALS OR CABLE
ANTENNA
ANALOG / DIGITAL
ANTENNA IN
CABLE
The tuner in this HDTV can receive:
•Digital and Analog off air signals from an antenna
•Analog or ClearQAM cable channels from a direct Cable TV connection.
Need help? www.sanyoctv.com 