
CONTENTS
  | Contents | 
  | 
Chapter  | Page  | |
1. Specifications  | 10  | |
2. Introduction  | 12  | |
2.1  | Description  | 12  | 
2.2  | Abbreviations  | 13  | 
3. Getting Started  | 14  | |
3.1  | Inspection  | 14  | 
3.2  | Configuration  | 14  | 
3.3  | Serial Port Settings  | 16  | 
  | 3.3.1 Serial Baud Rate  | 16  | 
  | 3.3.2 Serial Word Length (Data Bits)  | 18  | 
  | 3.3.3 Serial Stop Bits  | 18  | 
  | 3.3.4 Serial Parity  | 19  | 
  | 3.3.5 Serial Echo  | 19  | 
  | 3.3.6 Serial Handshake  | 20  | 
3.4  | Selecting Terminator Substitution  | 21  | 
  | 3.4.1 Serial Terminator  | 21  | 
  | 3.4.2 IEEE Bus Terminator  | 22  | 
3.5  | Selecting the Mode  | 22  | 
3.6  | Selecting the IEEE Address  | 23  | 
3.7  | Feature Selections  | 24  | 
  | 3.7.1 Controller Features  | 24  | 
  | 3.7.2 Peripheral Features  | 25  | 
3.8  | Serial Interface  | 25  | 
  | 3.8.1   | 26  | 
  | 3.8.2 Serial Signal Descriptions  | 26  | 
  | 3.8.3   | 29  | 
3.9  | General Operation  | 30  | 
4. Controller Operation  | 32  | |
4.1  | 32  | |
4.2  | Serial and IEEE Terminator Substitution  | 33  | 
4.3  | IEEE Address Selection  | 34  | 
7