Black Box IC026AE-R2, IC026A-R2 manual Specifications, General

Page 11

CHAPTER 1: Specifications

General
Data Buffer —	32,000 characters dynamically allocated
Indicators —	LEDs for IEEE Talk and Listen, Serial Send
	and Receive, and Power
Power —	105-125V or 210-250V; 50-60 Hz, 10 VA max.
Size —	2.7"H x 5.5"W x 7.4"D (6.9 x 14 x 18.8 cm)
Weight —	3.6 lb. (1.6 kg)
Environment —	0 to 50°C; 0 to 70% R.H. to 35°C.
	Linearly derate 3% R.H./degrees Centigrade
	from 35 to 50°C
Controls —	Power Switch (external), IEEE and Serial
	parameter switches (internal). Jumper
	selection of RS-232 or RS-422 operation
	(internal)
Certification —	FCC, CE

WARNING!

Do not use this interface outdoors. The interface is intended for indoor use only. Using this equipment outdoors could result in equipment failure, bodily injury, or death.

CAUTION

Do not connect AC line power directly to the RS-232↔IEEE 488 Interface

Converter. Direct AC connection will damage equipment.

11

Image 11

Contents RS-232↔IEEE Interface Converter RS-232↔IEEE 488 Interface Converter Trademarks Used in this Manual RS-232↔IEEE 488 Interface Converter NOM Statement RS-232↔IEEE 488 Interface Converter Contents RS-232↔IEEE 488 Interface Converter Contents Serial Interface SpecificationsIEEE-488 Interface General SpecificationsDescription IntroductionAbbreviations Serial Port ConfigurationGetting Started InspectionSW3 Serial Port Settings Switch SW1 Selecting the Serial Baud Rate Switch SW1 Selecting the Serial Word Length Data Bits Switch SW2 Selecting the Serial Parity Switch SW1 Selecting the Serial Handshake Selecting Terminator Substitution Switch SW2 Selecting the Serial TerminatorSwitch SW3 Selecting the Ieee Bus Terminator Selecting the ModeSelecting the Ieee Address 10. Switch SW2 Selecting the ModeFeature Selections Serial Interface 15. Selecting RS-232 or RS-422 Signal Levels Request To Send-Output-Pin RxD Receive Data-Input-PinTxD Transmit Data-Output-Pin Clear To Send-Input-Pin+TxD Transmit Data Plus-Output-Pin Vtest Test Voltage-Output-PinGnd Ground-Pin +RxD Receive Data Plus-Input-PinRTS CTS DSR RTS CTS GeneralGetting Started Controller-Mode Serial to Ieee Operation Controller OperationSerial and Ieee Terminator Substitution Ieee Address Selection Talk-Back FeaturesSwitch SW1 Enabling or Disabling Talk-Back on Terminator Switch SW2 Enabling or Disabling Talk-Back on Timeout SP1PA1000,1000PDPA1000,6000PUSP0 7470APlotter Applications A PC-Based Graphics System SW3 MacPlot Configuration Screen Setting the Internal DIP Shorting Jumper for RS-422 SW3 Printer Applications Serial and Ieee Input Buffers Peripheral OperationPeripheral-Mode Operation Ieee Data Transfers Controlled BUS Data Transfers DIO8 Ieee Input Buffer not Empty Serial-Poll Status-Byte RegisterIeee Input Buffer Full RsvNot Defined-Always Serial Input Buffer not EmptyIeee 488 Bus Implementation Use of Serial and Bus TerminatorsUntalk UNT SW3 View for Ieee Address Selection General Structure Ieee 488 PrimerHistory RS-232↔IEEE 488 Interface Converter DMM Send It to My AddressBus Management Lines Data Valid DAV Handshake LinesData Lines Multiline CommandsTalk Address Group TAG More on Service Requests Serial Poll Address Device Part Number Function Theory of OperationComponent Layout of the Interface Converter’s Motherboard Board LayoutRED BLK CLS Appendix A. Sample Dumb-Terminal ProgramSOH Multiline MessagesAscii Character How To Read the ChartDIO1 DIO2 DIO3 IndexIndex SW1 Copyright 1998. Black Box Corporation. All rights reserved