Xerox ls 32270 instruction manual Error Messages, Recoverable Errors

Page 27

Error Messages

Xerox LS 3270

7. Error Messages

Errors fall into two categories: the operator-recoverable errors and the non-recoverable hardware errors.

The error messages listed below are all printed out on paper when the error situation arises (provided the printer is on-line).

You correct the errors from the host system in accordance with the error messages given.

7.1. Recoverable Errors

The error messages are listed in alphabetical order below.

BARCODE IS DISABLED

ESCAPE SEQUENCE ERROR

NOT NUMBER

ESC X IS WRONG

ESCAPE SEQUENCE ERROR

ESCAPE SEQUENCE ERROR

NUMERICAL OVERFLOW

ESCAPE SEQUENCE ERROR

CREATE TRANSLATE TABLE

OUT OF RANGE. MAX 8' 13

ESCAPE SEQUENCE ERROR

NO TRANSLATE TABLE

CREATED

ESCAPE SEQUENCE ERROR

NO TRANSLATE TABLE

APL

CREATED

- 27 -

Image 27
Contents Rank Xerox Electronic Documentation Preface Related ManualsSeptember Table of Contents PCL or FSL output driver What is the Xerox LS 3270?PCL Driver Default Introduction to the Xerox LSChanging the Driver Xerox LS 3270 FeaturesSupported Control Units Installation RequirementsOperating Environment Paper Size Default US/EUKnowing the Front Panel Installation of the Xerox LSInstallation Pre-Installation InformationPrinter Dependency Below follows the procedure for installing the Xerox LS Installation ProcedureXerox LS 3270 and its side panel Automatic Power Supply ControlPCL driver TestingTimeout PAR Parallel input Indicators of the Xerox LSOperation of the Xerox LS CU Contact with Control UnitSpecifying Timeout 3NVRAM = Non-volatile RAM Programming theXerox LS Setup functions supported in PCL mode ESC Features Where % is the defined ESC characterWhere % is the defined ESC character Send Logo Functions User Settings Functions X-FunctionsTest functions T-Functions Engineering FunctionsSetup Functions supported in FSL mode ESC Features User Settings Functions X-Functions ??%%Y100,10,’SHARESTRING’%%X1 FSL Setup via Xerox LS 3270 Parallel PortLimitations when Y249 is active Activating the Y249 Engineering FunctionDeactivating the Y249 Engineering Function Updating firmware Recoverable Errors Error MessagesThere is no Space Left Dynamic Area Non-Recoverable Hardware Errors Busy Timeout Timeout Coax Test PrintoutsPCL Test Printout Active Gfid = Proportional Spaced =FSL Test Printout Busy TimeoutLPI FSL N/S Appendix A. Quick Reference Guide to FSL FunctionsFSL N/S LPIEbcdic Y10 Y12 Y22 Y13Are wrapped Y19Name Syntax Parameters Deviations Y35 EAB Y39Y41 Y47 IRQESC EEPROM/RAMEeprom Y52 Y53Y54 Y60 Y55Y56 Y59Y71 Y74HEX N2data PCL modeFSL mode Ascii HEXAPL Y79Name Syntax Parameters Deviations Y94 Y91Y92 Y93Y110 Y96Y98 APOY111 Y112Y113 Y114 Y115Y119 Re. T2 RAMData Coax Supported Printers External Appendix B. Selected Xerox ProductsCoax Index