Xerox ls 32270 instruction manual Y114, Y115, Y119

Page 52

Appendix A

Xerox LS 3270

No.	Name	Syntax	Parameters		Deviations
114	idaAFP	%Y114,<n1>%	n1		Y114:
	Colour		*0	= No colour	PCL only
	Support			support
				available
			1	= Support for
				colour printing
			2	= Colour by
				simulation
			9	= As 1, but with
				Pixel Placement
				Support
			10	= As 2, but with
				Pixel Placement
				Support
115	idaAFP Misc.	%Y115,<n1>%	n1		Y115:
			0	= No features	PCL only
				covered by this
				FSL available
			*1	= Support for Unit
				selection in
				printer
119	Auto-	%Y119,<n1>%	n1		Y119:
	Configura		*0	= Disable Auto-	PCL only
	tion select			configuration
			2	= Auto-
				configuration
				via PJL
120	Settings	%Y120,<n1>%	n1
	Print-Out at		*0	= Disable
	Power On			settings print-
				out at power on
			1	= Enable settings
				printout at
				power on
249	Enter	%Y249,<n1>%	n1
	Engineering		password
	Mode		(contact your local
			distributor)

- 52 -

Image 52

Contents Rank Xerox Electronic Documentation Related Manuals PrefaceSeptember Table of Contents What is the Xerox LS 3270? PCL Driver DefaultIntroduction to the Xerox LS PCL or FSL output driverXerox LS 3270 Features Changing the DriverInstallation Requirements Supported Control UnitsPaper Size Default US/EU Operating EnvironmentInstallation of the Xerox LS Knowing the Front PanelPre-Installation Information InstallationPrinter Dependency Installation Procedure Below follows the procedure for installing the Xerox LSAutomatic Power Supply Control Xerox LS 3270 and its side panelTesting PCL driverTimeout Indicators of the Xerox LS Operation of the Xerox LSCU Contact with Control Unit PAR Parallel inputSpecifying Timeout 3NVRAM = Non-volatile RAM Programming theXerox LS Setup functions supported in PCL mode Where % is the defined ESC character ESC FeaturesWhere % is the defined ESC character Send Logo User Settings Functions X-Functions Test functions T-FunctionsEngineering Functions FunctionsSetup Functions supported in FSL mode ESC Features User Settings Functions X-Functions FSL Setup via Xerox LS 3270 Parallel Port ??%%Y100,10,’SHARESTRING’%%X1Activating the Y249 Engineering Function Limitations when Y249 is activeDeactivating the Y249 Engineering Function Updating firmware Error Messages Recoverable ErrorsThere is no Space Left Dynamic Area Non-Recoverable Hardware Errors Test Printouts Busy Timeout Timeout CoaxPCL Test Printout Proportional Spaced = Active Gfid =Busy Timeout FSL Test PrintoutAppendix A. Quick Reference Guide to FSL Functions FSL N/SLPI LPI FSL N/SEbcdic Y10 Y12 Y13 Are wrappedY19 Y22Name Syntax Parameters Deviations Y35 Y39 EABY41 IRQ Y47EEPROM/RAM ESCEeprom Y53 Y52Y54 Y55 Y56Y59 Y60Y74 Y71HEX PCL mode FSL modeAscii HEX N2dataY79 APLName Syntax Parameters Deviations Y91 Y92Y93 Y94Y96 Y98APO Y110Y112 Y111Y113 Y115 Y114Y119 RAM Re. T2Data Appendix B. Selected Xerox Products Coax Supported Printers ExternalIndex Coax