Xerox ls 32270 instruction manual Timeout

Page 13

Installation

Xerox LS 3270

Keep the settings printout together with this manual for future reference.

Settings Printout using FSL Y120 (PCL mode only)

A settings printout can also be generated at power-on by activating function Y120 2.

2.4. Timeout

The Xerox LS 3270 enables printer sharing between the system and a PC. For this purpose it is possible to specify a timeout period.

If the printer is receiving input on the parallel port, for example, and there is a break in the transmission of data, the other input ports will not be polled for the period speci fied.

The factory default timeout is 20 seconds. The timeout may be changed to suit your requirements. This is done by sending a new setup to the Xerox LS 3270 input port where you want it to take effect. See Chapter 4. Specifying Timeout.

When specifying the timeout it is also possible to specify a user string. A user string may be used for changing from one symbol set (e.g. Roman 8) to another (e.g. IBM -PC8), for example.

NOTE:

Settings on the coax input port are automatically reestablished after another input port has been using the printer.

On the parallel input port, you have to program the required setup yourself.

For more detailed information on the commands required, see Chapter 5, Specifying Timeout.

2For details on how to define the ESC character %, please see Chapter 5.

- 13 -

Image 13
Contents Rank Xerox Electronic Documentation Related Manuals PrefaceSeptember Table of Contents PCL Driver Default What is the Xerox LS 3270?Introduction to the Xerox LS PCL or FSL output driverChanging the Driver Xerox LS 3270 FeaturesSupported Control Units Installation RequirementsOperating Environment Paper Size Default US/EUKnowing the Front Panel Installation of the Xerox LSPre-Installation Information InstallationPrinter Dependency Below follows the procedure for installing the Xerox LS Installation ProcedureXerox LS 3270 and its side panel Automatic Power Supply ControlPCL driver TestingTimeout Operation of the Xerox LS Indicators of the Xerox LSCU Contact with Control Unit PAR Parallel inputSpecifying Timeout 3NVRAM = Non-volatile RAM Programming theXerox LS Setup functions supported in PCL mode Where % is the defined ESC character ESC FeaturesWhere % is the defined ESC character Send Logo Test functions T-Functions User Settings Functions X-FunctionsEngineering Functions FunctionsSetup Functions supported in FSL mode ESC Features User Settings Functions X-Functions ??%%Y100,10,’SHARESTRING’%%X1 FSL Setup via Xerox LS 3270 Parallel PortActivating the Y249 Engineering Function Limitations when Y249 is activeDeactivating the Y249 Engineering Function Updating firmware Recoverable Errors Error MessagesThere is no Space Left Dynamic Area Non-Recoverable Hardware Errors Test Printouts Busy Timeout Timeout CoaxPCL Test Printout Active Gfid = Proportional Spaced =FSL Test Printout Busy TimeoutFSL N/S Appendix A. Quick Reference Guide to FSL FunctionsLPI LPI FSL N/SEbcdic Y10 Y12 Are wrapped Y13Y19 Y22Name Syntax Parameters Deviations Y35 Y39 EABY41 Y47 IRQEEPROM/RAM ESCEeprom Y53 Y52Y54 Y56 Y55Y59 Y60Y74 Y71HEX FSL mode PCL modeAscii HEX N2dataAPL Y79Name Syntax Parameters Deviations Y92 Y91Y93 Y94Y98 Y96APO Y110Y112 Y111Y113 Y115 Y114Y119 RAM Re. T2Data Coax Supported Printers External Appendix B. Selected Xerox ProductsCoax Index