AT&T Z990 Getting Around, Getting Started Switching to Sleep Mode, Waking up Your Phone

Getting Started

Switching to Sleep Mode

To save battery power, Sleep Mode suspends your device to a low-power-consumption state while the display is off. Your device also goes into Sleep Mode by itself when the display is automatically turned off after a certain period of time, which you can set in Settings

>Display > Screen timeout.

Press the Power Key to switch to Sleep Mode.

Waking up Your Phone

1.Press the Power Key to activate your screen display.

2.Drag the icon to the right.

Note: If you have set an unlock pattern, PIN or password for your phone (see Sorting out Your Phone Settings – Security Settings) you’ll need to draw the pattern or enter the PIN/password to unlock your screen.

Getting Around

Touch Control

Use the touch screen to control your phone. The controls on your touch screen change dynamically depending on the tasks you’re performing.

1.Tap the buttons, icons, or applications to select items or to open applications.

2.Keep your finger on an item to see the available options.

3.Swipe the screen to scroll up, down, left or right.

4.Point, drag, and drop to move particular items across the screen.

5.Pinch with two fingers, or double-tap the screen, to zoom in/out on a web page or an image.

Note: You can view the phone screen in portrait or landscape orientation simply by holding it upright or turning it on its side.

5