CONFIG Commands
set system ftp-server option [ off on ]
Enables or disables a simple FTP server in the Gateway. If enabled, the Gateway will accept binary embedded software images (‘.bin’) files or command line configuration files.
| Supported FTP commands |
MODE | (data transfer mode (only Streaming supported) |
NOOP | (send back ok) |
PORT | (specify client address:port for data) |
QUIT | (quit) |
STOR | (send file to FTP server) |
SYST | (get system info about FTP server) |
TYPE | (set data representation type, ASCII and IMAGE (BIN) only supported) |
USER | (send username for authentication) |
set system log-size [ 10240... 65536 ]
Specifies a size for the system log. The most recent entries are posted to the beginning of the log. When the log becomes full, the oldest entries are dropped. The default is 30000.
set system persistent-log [ off on ]
When set to on, causes the log information to be kept in flash memory.
set system idle-timeout { telnet [ 1...120 ] http [ 1... 120 ] }
Specifies a timeout period of inactivity for telnet or HTTP access to the Gateway, after which a user must
set system username { administrator name user name }
Specifies the usernames for the administrative user – the default is admin; and a non- administrative user – the default is user.
271
