
Home
Trigger Ports forwards a range of ports to an IP address on the LAN only after specific out- bound traffic “triggers” the feature. Enter the following information:
•Service Name: A unique identifier for the Custom Service.
•Global Port Range: Range of ports on which incoming traffic will be received.
•Local Trigger Port: Port number of the type of outbound traffic that needs to happen (will be the trigger) to then allow the configured ports for inbound traffic.
Example: Set the trigger port to 21 and configure a range of 25 – 110. You would need to do an outbound ftp before you were able to do an inbound smtp.
Click the Next button.
Static NAT
This feature allows you to:
•Direct your Router to forward all externally initiated IP traffic (TCP and UDP protocols only) to a default host on the LAN.
•Enable it for certain situations:
–Where you cannot anticipate what port number or packet protocol an
–When you want all unsolicited traffic to go to a specific LAN host.
63