Motorola 7.7.4 manual Exposed-address# n protocol tcp udp both any, 264

exposed-address# "n" protocol [ tcp udp both any ]

Sets the protocol for the stateful inspection feature for the exposed address list. Accepted values for protocol are tcp, udp, both, or any.

If protocol is not any, you can set port ranges:

set security state-insp xposed-addr exposed-address# "n" start-port [ 1 - 65535 ]

set security state-insp xposed-addr exposed-address# "n" end-port [ 1 - 65535 ]

264