Motorola 7.7.4 manual License key, Loglevel level, 173

SHELL Commands

The server_address argument identifies the IP address of the TFTP server on which your Motorola Netopia® Gateway operating software is stored. The filename argument identifies the path and name of the operating software file on the TFTP server.

If you include the optional keyword confirm, you will not be prompted to confirm whether or not you want to perform the operation.

license [key]

This command installs a software upgrade key. An upgrade key is a purchased item, based on the serial number of the gateway.

log message_string

Adds the message in the message_string argument to the Motorola Netopia® Gateway diagnostic log.

loglevel [level]

Displays or modifies the types of log messages you want the Motorola Netopia® Gateway to record. If you enter the loglevel command without the optional level argument, the command line interface displays the current log level setting.

You can enter the loglevel command with the level argument to specify the types of diagnostic messages you want to record. All messages with a level number equal to or greater than the level you specify are recorded. For example, if you specify loglevel 3, the diagnostic log will retain high-level informational messages (level 3), warnings (level 4), and failure messages (level 5).

Use the following values for the level argument:

•1 or low – Low-level informational messages or greater; includes trivial status mes- sages.

•2 or medium – Medium-level informational messages or greater; includes status mes- sages that can help monitor network traffic.

•3 or high – High-level informational messages or greater; includes status messages that may be significant but do not constitute errors.

•4 or warning – Warnings or greater; includes recoverable error conditions and useful operator information.

173