Motorola 7.7.4 manual 233, Set queue name wfq weight-type bps

CONFIG Commands

Weighted Fair Queue

set queue name wfq option [ on off ]

set queue name wf_queue_name type wfq

set queue name wf_queue_name weight-type [ relative bps ]

set queue name wf_queue_name entry n input input_queue_name set queue name wf_queue_name entry n weight weight

set queue name wf_queue_name entry n share-bw [ on off ]

set queue name wf_queue_name entry n default-input queue_name

Specifies the attributes of the Weighted Fair Queue named wf_queue_name.

•wf_queue_name – name of weighted fair queue

A weighted fair queue can contain up to 8 input queues. For each input queue, the follow- ing is configured:

•weight-type– the weighted fair queue configuration allows you to set the rate in bits per second (bps) or percentage of the line rate (relative). bps is the default.

•n – entry number for this input queue

•input_queue_name – name of input queue

•weight_value – numeric relative weight of queue

•share-bw– if enabled, the bandwidth for this queue can be shared between other queues when idle.

•default-input– specifies the default input queue name.

The default special queuing configuration shapes the rate of a custom flow toward the Remote Management Server.

By default, the following WFQ is created:

set queue name "wfq" option on set queue name "wfq" type wfq

set queue name "wfq" weight-type bps

set queue name "wfq" entry 1 input "basic_q0" set queue name "wfq" entry 1 weight 10000 set queue name "wfq" entry 1 share-bw off set queue name "wfq" entry 2 input "basic_q1" set queue name "wfq" entry 2 weight 20000 set queue name "wfq" entry 2 share-bw off set queue name "wfq" entry 3 input "basic_q2"

233