Motorola 7.7.4 manual 297

CONFIG Commands

•inband: sends the DTMF digits as a normal inband tone.

•rfc2833: sends the DTMF digits as an event as part of the RTP packet header information.

•info: sends the DTMF digits in the SIP INFO message.

set voip phone [ 0 1 ] sip-advanced-setting sip-end-of-dial-marker [ off on ]

sip-end-of-dial-marker– turns an “end of dial” (#) signal that indicates that the dialed number is complete on or off.

set voip phone [ 0 1 ] sip-advanced-setting call-feature call-forwarding-all-option [ off on ]

call-forwarding-all-option– turns unconditional call forwarding on or off.

set voip phone [ 0 1 ] sip-advanced-setting call-feature call-forwarding-all-number phone_number

call-forwarding-all-number – specifies the number to which calls are to be forwarded when call-forwarding-all-option is on.

set voip phone [ 0 1 ] sip-advanced-setting call-feature call-forwarding-on-busy-option [ off on ]

call-forwarding-on-busy-option– turns call forwarding when the line is busy on or off.

set voip phone [ 0 1 ] sip-advanced-setting call-feature call-forwarding-on-no-answer-option [ off on ]

call-forwarding-on-no-answer-option– turns call forwarding when there is no answer on or off.

set voip phone [ 0 1 ] sip-advanced-setting call-feature call-forwarding-on-no-answer-number phone_number

call-forwarding-on-no-answer-number – specifies the number to which calls are to be forwarded when call-forwarding-on-no-answer-option is on.

297