Motorola 7.7.4 manual Set snmp notify type v1-trap v2-trap inform, Set snmp v3 enable off on, 266

You must put the location_info argument in double-quotes if it contains embedded spaces.

SNMP Notify Type Settings

set snmp notify type [ v1-trap v2-trap inform ]

Sets the type of SNMP notifications that the system will generate:

•v1-trap– This selection will generate notifications containing an SNMPv1 Trap Protocol Data Unit (PDU)

•v2-trap– This selection will generate notifications containing an SNMPv2 Trap PDU

•inform – This selection will generate notifications containing an SNMPv2 InformRe- quest PDU.

SNMP V3 Settings

SNMP V3 is supported beginning with Firmware Version 7.4.

SNMPv3 supports two users, the Read-Only user and the Read-Write user. The read-only account will have read-only access to all objects known to the agent, while the read-write account will have read-write access to all objects known to the agent. SNMPv3 adds the ability to authenticate and/or encrypt management traffic.

For security reasons, enabling SNMPv3 will disable SNMPv1/v2.

•If SNMPv3 is enabled, the firmware will no longer respond to SNMPv1/SNMPv2 traffic, nor generate SNMPv1/v2 traps in SNMPv1/SNMPv2 packets. If it receives v1 or v2 packets when v3 is enabled, it behaves as if it does not support v1/v2, and silently dis- cards the incoming packet.

•If SNMPv3 is disabled, the firmware will not respond to SNMPv3 traffic, nor generate SNMPv3 notifications. The firmware behaves as if it does not support v3 and silently discards the incoming packet.

set snmp v3 enable [ off on ]

Turns SNMPv3 off or on.

266