CONFIG Commands

Internet Key Exchange (IKE) Settings

The following four IPsec parameters configure the rekeying event.

set security ipsec tunnels name "123" IKE-mode ipsec-soft-mbytes (1000) {1-1000000}

set security ipsec tunnels name "123" IKE-mode ipsec-soft-seconds (82800) {60-1000000}

set security ipsec tunnels name "123" IKE-mode ipsec-hard-mbytes (1200) {1-1000000}

set security ipsec tunnels name "123" IKE-mode

ipsec-hard-seconds (86400) {60-1000000}

The soft parameters designate when the system begins to negotiate a new key. For example, after 82800 seconds (23 hours) or 1 Gbyte has been transferred (whichever comes first) the key will begin to be renegotiated.

The hard parameters indicate that the renegotiation must be complete or the tunnel will be disabled. For example, 86400 seconds (24 hours) means that the renegotiation must be complete within one day.

Both ends of the tunnel set parameters, and typically they will be the same. If they are not the same, the rekey event will happen when the longest time period expires or when the largest amount of data has been sent.

261

Page 261
Image 261
Motorola 7.7.4 manual 261