Motorola 7.7.4 manual Set wireless wmm option off on, 281

CONFIG Commands

Wireless Multi-media (WMM) Settings

Router EDCA Parameters (Enhanced Distributed Channel Access) govern wireless data from your Gateway to the client; Client EDCA Parameters govern wireless data from the client to your Gateway.

set wireless wmm option [ off on ]

Enables or disables wireless multi-media settings option, which allows you to fine tune WiFi Multimedia Quality of Service (QoS) by transmitting data depending on Diffserv priority set- tings. These priorities are mapped into four Access Categories (AC), in increasing order of priority: Background (BK), Best Effort (BE), Video (VI), and Voice (VO). It requires WiFi Multi- media-capable clients, usually a separate feature enabled at the client.

•aifs: (Arbitration Interframe Spacing) the wait time in milliseconds for data frames.

Valid values are: 1 – 255

•cwmin: (Minimum Contention Window) upper limit in milliseconds of the range for determining initial random backoff. The value you choose must be lower than cwmax. Valid values are: 1, 3, 7, 15, 31, 63, 127, 255, or 511.

•cwmax: (Maximum Contention Window) upper limit in milliseconds of the range of determining final random backoff. The value you choose must be higher than cwmin. Valid values are: 3, 7, 15, 31, 63, 127, 255, 511, or 1023.

•txoplimit: Time interval in microseconds that clients may initiate transmissions.

Valid values are: 0 – 9999.

☛NOTE:

It is not recommended that you modify these settings without direct knowl- edge or instructions to do so. Modifying these settings inappropriately could seriously degrade network performance.

set wireless wmm router-edca voice { aifs 1... 255 } set wireless wmm router-edca voice { cwmin value } set wireless wmm router-edca voice { cwmax value }

Sets values for Gateway WMM voice parameters.

281