Motorola 7.7.4 manual Set wireless mode both-b-and-g b-only g-only, 278

set wireless mode { both-b-and-g b-only g-only }

Specifies the wireless operating mode for connecting wireless clients: both-b-and-g, b- only, or g-only, and locks the Gateway in that mode.

☛NOTE:

If you choose to limit the operating mode to B or G only, clients using the mode you excluded will not be able to connect.

set wireless multi-ssid option { on off }

Enables or disables the multi-ssidfeature which allows you to add additional network identifiers (SSIDs or Network Names) for your wireless network. When enabled, you can specify up to three additional SSIDs with separate privacy settings for each. See below.

set wireless multi-ssid {second-ssid third-ssid fourth-ssid } name

Specifies a descriptive name for each SSID. when multi-ssid option is set to on.

set wireless multi-ssid second-ssid-privacy { off WEP WPA-PSK WPA-802.1x }

set wireless multi-ssid third-ssid-privacy { off WEP WPA-PSK WPA-802.1x }

set wireless multi-ssidfourth-ssid-privacy { off WEP WPA-PSK WPA-802.1x }

Specifies the type of privacy enabled on multiple SSIDs when multi-ssid option is set to on. off = no privacy; WEP = WEP encryption; WPA-PSK = Wireless Protected Access/Pre- Shared Key; WPA-802.1x = Wireless Protected Access/802.1x authentication. See “Wire- less Privacy Settings” on page 284 for more information.

☛NOTE:

WEP is supported on only one SSID at a time, and will not be available if another SSID already has it configured.

278