Motorola 7.7.4 manual Set security ipsec option off on off, 256

68	DHCP server	Enabled	Enabled	Enabled
161	snmp	Enabled	Enabled	Enabled
	ping (ICMP)	Enabled	Enabled	WAN - Disabled
				LAN -
				Local Address
				Only

☛NOTE:

The Gateway’s WAN DHCP client port in SilentRunning mode is enabled. This feature allows end users to continue using DHCP-served IP addresses from their Service Providers, while having no identifiable presence on the Internet.

SafeHarbour IPSec Settings

SafeHarbour VPN is a tunnel between the local network and another geographically dis- persed network that is interconnected over the Internet. This VPN tunnel provides a secure, cost-effective alternative to dedicated leased lines. Internet Protocol Security (IPsec) is a series of services including encryption, authentication, integrity, and replay pro- tection. Internet Key Exchange (IKE) is the key management protocol of IPsec that estab- lishes keys for encryption and decryption. Because this VPN software implementation is built to these standards, the other side of the tunnel can be either another Motorola Neto- pia® unit or another IPsec/IKE based security product. For VPN you can choose to have traffic authenticated, encrypted, or both.

When connecting the Motorola Netopia® unit in a telecommuting scenario, the corporate VPN settings will dictate the settings to be used in the Motorola Netopia® unit. If a param- eter has not been specified from the other end of the tunnel, choose the default unless you fully understand the ramifications of your parameter choice.

set security ipsec option (off) {on off}

Turns on the SafeHarbour IPsec tunnel capability. Default is off. See “IPSec” on page 94 for more information.

256