Motorola 7.7.4 Set snmp v3 ro-account security-name string, Set snmp v3 ro-account auth-password

CONFIG Commands

set snmp v3 ro-account security-name string

Adds the specified 1 – 32 character name string as the name of the Read-Only user.

set snmp v3 ro-account security-model [ none auth auth+priv ]

Sets the security model for the Read-Only account: none, authentication, or authentication plus privacy.

•none specifies no authentication or encryption;

•auth (authentication, no encryption) requires a security name and authentication pass- word, and a specified authentication protocol;

•auth+priv (authentication plus privacy DES encryption) requires authentication plus a privacy password.

set snmp v3 ro-account auth-protocol [ md5 sha ]

Specifies the authentication protocol for the Read-Only account: md5 (HMAC-MD5 authenti- cation) or sha (HMAC-SHA authentication), if the security model is set to auth or auth+priv.

set snmp v3 ro-account auth-password

Specifies the authentication password, a 1 – 32 character string, for the Read-Only account, if the security model is set to auth or auth+priv. You are prompted for a new password and then to repeat the password. If there is an existing password, the user must enter the old password, then the new password, and repeat it.

set snmp v3 ro-account priv-password

Specifies the privacy password, a 1 – 32 character string, for the Read-Only account, if the security model is set to auth+priv. You are prompted for a new password and then to repeat the password. If there is an existing password, the user must enter the old pass- word, then the new password, and repeat it.

set snmp v3 ro-account localize-keys [ off on ]

Determines whether or not the generated keys should be localized (hashed) with the Engine ID for the Read-Only account, if the security model is set to auth+priv.

267