Motorola 7.7.4 manual Vlan Settings

VLAN Settings

You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it, from administering the Gateway. See “VLAN” on page 106 for more information.

set vlan name name

Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of node names to select for editing. Once a new VLAN name is specified, presents the list of VLAN characteristics to define.

set vlan name name type [ by-port global ]

Specifies VLAN type: by-portor global. Default is by-port.

set vlan name name id VID

Specifies VLAN id (VID), when type is set to global. The numerical range of possible VIDs is 1 - 4094. (A VID of zero (0) is permitted on the Ethernet WAN port only.)

set vlan name name admin-restricted [ off on ]

Turns admin-restricted off or on. Default is off. If you select on, administrative access to the Gateway is blocked from the specified VLAN.

set vlan name name seg-pbits [ 0 - 7 ]

Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with unmarked priority bits (pbits) will be re-marked to this priority.

set vlan name name ports port option [ off on ]

Enables or disables the Gateway’s physical Ethernet, USB or VCC port or wireless SSID for the specified VLAN.

288