Motorola 7.7.4 manual Set ip ip-ppp vcc1 mcast-fwd on off, Ethernet Port Settings, 248

set ip ip-ppp vcc1 mcast-fwd [ on off }

Enables or disables multi-cast forwarding on the specified interface. If set to on, this inter- face acts as an IGMP proxy host, and IGMP packets are transmitted and received on this interface on behalf of IGMP hosts on the LAN interface. See “IGMP Settings” on page 211 for more information.

set ip ip-ppp vcc1 igmp-null-source-addr [ off on ]

Enables or disables IGMP null source address, if mcast-fwdis set to on. If enabled, the source IP address of every IGMP packet transmitted from this interface is set to 0.0.0.0. This complies with the requirements of TR-101, and removes the need for a publicly adver- tised IP address on the WAN interface.

Ethernet Port Settings

set ethernet ethernet A mode { auto 100M-full 100M-full-fixed 100M-half-fixed 10M-full-fixed 10M-half-fixed 100M-half 10M-full 10M-half }

Allows mode setting for the ethernet port. Only supported on units without a LAN switch, or dual ethernet products (338x). In the dual ethernet case, “ethernet B” would be specified for the WAN port. The default is auto.

248