Status Indicator Lights
LED Function Summary Matrix
| Power | DSL | Internet | Ethernet | Wireless |
|
|
|
|
|
|
Unlit | No power | No signal | No signal | No signal | No signal |
|
|
|
|
|
|
Solid | Power on | Internet con- | Router is con- | Synched with | Synched with |
Green |
| nection is | nected. | Ethernet card | WLAN |
|
| established. |
|
|
|
|
|
|
|
|
|
Flashing | N/A | Activity on the | Transmitting | Activity on the | Activity on the |
Green |
| DSL cable | or receiving | Ethernet | WLAN |
|
|
| data. | cable |
|
|
|
|
|
|
|
Red | Updating | N/A | N/A | Bad userid | N/A |
| embedded |
|
| and pass- |
|
| software, or |
|
| word are |
|
| for system |
|
| entered. |
|
| failure. |
|
|
|
|
|
|
|
|
|
|
If a status indicator light does not look correct, look for these possible problems:
If LED is | Possible problems | |
not Lit | ||
| ||
|
| |
| • Make sure the power switch is in the ON position. | |
Power | • Make sure the power adapter is plugged into the DSL Router properly. | |
• Try a known good wall outlet. | ||
| ||
| • Replace the power supply and/or unit. | |
|
| |
| • Make sure that any telephone has a microfilter installed. | |
| • Make sure the you are using the correct cable. The DSL cable is the thinner standard tele- | |
| phone cable. | |
DSL | • Make sure the DSL cable is plugged into the correct wall jack. | |
• Make sure the DSL cable is plugged into the DSL port on the DSL Router. | ||
| • Make sure the DSL line has been activated at the central office DSLAM. | |
| • Make sure the DSL Router is not plugged into a micro filter. | |
| • Launch a browser and try to browse the Internet. If the DSL Active light still does not flash, | |
| then proceed to Advanced Troubleshooting. | |
|
|
