Motorola 7.7.4 manual Reset dhcp client release vcc-id, Reset dhcp client renew vcc-id, Reset dsl

Use the segment argument to ping a neighbor switch.

Use the end-to-endargument to ping a remote end node.

reset dhcp client release [ vcc-id]

Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the IP settings for the specified DSL port. The vcc-ididentifier is an “index” letter in the range B-I, and does not directly map to the VCC in use. Enter the reset dhcp client release command without the variable to see the letter assigned to each virtual circuit.

reset dhcp client renew [ vcc-id]

Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the IP settings for the specified DSL port. The vcc-ididentifier is an “index” letter in the range B-I, and does not directly map to the VCC in use. Enter the reset dhcp client release without the variable to see the letter assigned to each virtual circuit.

reset dsl

Resets any open DSL connection.

reset ppp vccn

Resets the point-to-point connection over the specified virtual circuit. This command only applies to virtual circuits that use PPP framing.

show atm [all]

Displays ATM statistics for the Motorola Netopia® Gateway. The optional all argument displays a more detailed set of ATM statistics.

show dsl [ all ]

Displays DSL port statistics, such as upstream and downstream connection rates and noise levels.

186