Motorola 7.7.4 manual 236, Rate-limiting weighted fair queue to 100Kbps

Funnel Queue

A funnel queue is used to limit the rate of the transmission below the actual line rate:

set queue name funnel_queue_name option [ on off ] set queue name funnel_queue_name type funnel

set queue name funnel_queue_name input input_queue_name set queue name funnel_queue_name bps bps

Specifies the Funnel Queue named funnel_queue_name attributes.

•funnel_queue_name – name of funnel queue

•input_queue_name – name of input queue

•bps – max bits per second permitted through funnel queue

By default, the following funnel queues are created:

Rate-limiting priority queue to 100Kbps:

set queue name pq-100kbps option on set queue name pq-100kbps type funnel set queue name pq-100kbps input pq set queue name pq-100kbps bps 100000

Rate-limiting weighted fair queue to 100Kbps:

set queue name wfq-100kbps option on set queue name wfq-100kbps type funnel set queue name wfq-100kbps input wfq set queue name wfq-100kbps bps 100000

Interface Queue Assignment

The WAN ethernet queue is assigned as follows:

set [ ethernet ethernet ip ethernet B ip-ppp vccn ] tx-queuequeue_name

By default, the WAN ethernet interface is assigned the default priority queue:

set ethernet ethernet B tx-queue pq

Other interfaces may likewise be assigned tx-queuevalues.

236