Xerox ls 32270 instruction manual There is no Space Left Dynamic Area

Page 28

Error Messages

Xerox LS 3270

ESCAPE SEQUENCE ERROR TRANSLATE TABLE LOAD CHARACTER IS OUT OF RANGE VALIDATION VALUE IN FLASH PROM IS WRONG VALUES ARE NOW OVERWRITTEN WITH FACTORY DEFAULTS

ESCAPE SEQUENCE ERROR ILLEGAL SEPARATOR

FUNCTION (NO) IS NOT SUPPORTED

ESCAPE SEQUENCE ERROR

ESC Y

MULTISTRIKE STRING IS TOO LONG

Not in engineering mode

FLASH PROM VERIFICATION ERROR IN CELL

PARAMETER IS OUT OF RANGE

PASSWORD IS NOT ACTIVE

SYNTAX ERROR IN CALL. FUNC = (NO)

THE CONTENTS OF FLASH PROM HAS BEEN DAMAGED VALUES ARE NOW OVERWRITTEN WITH FACTORY DEFAULTS

There is no password

THE FLASH PROM IS ALREADY LOCKED, PASSWORD IS IGNORED

THE PASSWORD TO OPEN NVRAM AREA IS WRONG

THE PASSWORD IS TOO LONG

THE SELECTED BARCODE IS NOT SUPPORTED

The FLASH PROM is locked

The dynamic area is locked

The checksum in the FLASH PROM is wrong

THERE IS NO SPACE LEFT

IN THE DYNAMIC AREA

- 28 -

Image 28
Contents Rank Xerox Electronic Documentation Related Manuals PrefaceSeptember Table of Contents What is the Xerox LS 3270? PCL Driver DefaultIntroduction to the Xerox LS PCL or FSL output driverXerox LS 3270 Features Changing the DriverInstallation Requirements Supported Control UnitsPaper Size Default US/EU Operating EnvironmentInstallation of the Xerox LS Knowing the Front PanelPre-Installation Information InstallationPrinter Dependency Installation Procedure Below follows the procedure for installing the Xerox LSAutomatic Power Supply Control Xerox LS 3270 and its side panelTesting PCL driverTimeout Indicators of the Xerox LS Operation of the Xerox LSCU Contact with Control Unit PAR Parallel inputSpecifying Timeout 3NVRAM = Non-volatile RAM Programming theXerox LS Setup functions supported in PCL mode Where % is the defined ESC character ESC FeaturesWhere % is the defined ESC character Send Logo User Settings Functions X-Functions Test functions T-FunctionsEngineering Functions FunctionsSetup Functions supported in FSL mode ESC Features User Settings Functions X-Functions FSL Setup via Xerox LS 3270 Parallel Port ??%%Y100,10,’SHARESTRING’%%X1Activating the Y249 Engineering Function Limitations when Y249 is activeDeactivating the Y249 Engineering Function Updating firmware Error Messages Recoverable ErrorsThere is no Space Left Dynamic Area Non-Recoverable Hardware Errors Test Printouts Busy Timeout Timeout CoaxPCL Test Printout Proportional Spaced = Active Gfid =Busy Timeout FSL Test PrintoutAppendix A. Quick Reference Guide to FSL Functions FSL N/SLPI LPI FSL N/SEbcdic Y10 Y12 Y13 Are wrappedY19 Y22Name Syntax Parameters Deviations Y35 Y39 EABY41 IRQ Y47EEPROM/RAM ESCEeprom Y53 Y52Y54 Y55 Y56Y59 Y60Y74 Y71HEX PCL mode FSL modeAscii HEX N2dataY79 APLName Syntax Parameters Deviations Y91 Y92Y93 Y94Y96 Y98APO Y110Y112 Y111Y113 Y115 Y114Y119 RAM Re. T2Data Appendix B. Selected Xerox Products Coax Supported Printers ExternalIndex Coax