JVC HR-S9600EU specifications Safety Precautions

Page 2

2EN

SAFETYFIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

■When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

■Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

■Please read the various precautions on page 2 and 3 before installing or operating the recorder.

■It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

625

■Cassettes marked "S-VHS" and "VHS" can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked "S-VHS".

■SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

Contents HR-S9600EU Safety Precautions For Italy Do not place the recorderSituate Recorder Check ContentsBasic Connections Connect Recorder to MainsBack of Recorder Video ConnectionConnect Recorder to TV If you are referring to the front display panel Auto Set UpEN Initial Settings If you are referring to the on-screen displayLanguage Code Preset Download Just Clock If both auto channel set and auto clock set have failedLanguage for the on-screen display Just Clock onLanguage Return to Normal Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays 13 14OK or # Power Save ModeMode SET, then press SAVE, then press OK or #to set to onLI NK TV Auto Power OnLink Functions NexTView LinkAbout Ntsc Playback Colour System SetMode Press %Þ to move the highlight bar pointer toPoint Basic PlaybackLoad a Cassette Start PlaybackActivate HIGH-SPEED Search Playback FeaturesPlayback Manually Adjust TrackingOverride Automatic Tracking Return to AutomaticDigital 3R Digital TBC/NRInstant ReView Activate Instant ReviewRepeat Playback Soundtrack SelectionAudio signal during TimeScan TimeScanMove the highlight bar pointer to Time Scan Audio TimeScanSpeed SP Speed LP Audio output Basic Recording Recording Features Resume Recording Engage RECORD-PAUSE ModeLocate Start Point VHS Super VHS and VHSRecording Level Adjust AudioControl Screen Preparation S.T. Picture SystemEN Recording Or press Record on the recorder RecordingPlayback Timer Programming EN Timer RecordingSatellite Tuner Users Timer WarningÄTIMER indicator Time Express Timer ProgrammingBefore performing Express Timer Programming Return to Normal SET VPS/PDC ModeTimer Mode Engage RECORDER’SCheck, Cancel And Replace Programmes TE+SET, then press OK or # Auto SP→LP TimerFor Example Then press OK or #to selectOK or #to select either Auto TimerAuto TIMER, then press On or OFFBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording RE-SUPPLY Power Remote Control FunctionsSET Remote Control CodeSET TV Brand Code TV Multi-brand Remote ControlControl Your TV Using Additional Buttons Operate TVSET Satellite Tuner Brand Code EN Special FeaturesSatellite Tuner Multi-Brand Remote Control Operate Satellite TunerPreparation For Editing Access Mode SETControl SET Mode Select PictureEdit From Camcorder If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder EditingRepeat steps 4 6 as necessary Connector Lanc Cable not provided To Lanc connectorSynchro Editing Recorder PlayerEdit To Or From Another Video Recorder Your recorder NEL or Or AV Provided AV mode Mode Another recorderTV Receiver Your recorder TV Receiver Pin Scart CableAV1 Select Setting AV2 Select SettingStart Dubbing SET Input ModeEngage Audio Dubbing END Audio DubbingInsert Editing Locate END PointEND Insert Editing Engage Insert EditingStart Editing Press InsertPrepare for Editing Access R.A. Edit ScreenRandom As- semble Editing Load Source CassetteStart R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point END R.A. EditAccess Jlip ID NO. SET Screen Access Main Menu ScreenAccess Initial SET Screen SET Jlip ID NumberSystem Connections Connection ToTuner Simple ConnectionsPerfect Connections Connector ScartEN System Connections Satellite Tuner UnitBack of Recorder Mains outlet ConnectorBasic Connections DecoderConnect Decoder Connecting Using a DecoderSelect Input Mode SET TunerRear View Connecting Using a Stereo SystemSpeaker Television Mains outlet EN Subsi Diary Sett Ings Access Auto CH SETTuner Set Auto Channel SetPerform Auto Channel SET View Confirmation ScreenSU Bsidiary Settings Storing Channels ManuallyChange Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Press %Þ @ #until the item you want to move beginsChannel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List Select Channel to Perform TuningFine-Tuning Channels Already Stored FINE-TUNEVideo Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET RF Output SystemTurn the Recorder on Access Initial SETClock Set SET Date and TimeSET Just Clock Start Clock OperationEnter Receiving Channel Position Number Showview SetupNumber Guide Program Number SetTroubleshooting EN Timer Recording RoubleshootingÄ remain lit on the display panel. Is there Problem? Quest Ions and AnswersIndex Front ViewInside View of Front Panel Rear View Remote Control Remote Control LCD Speci Fications PAL-type colour signal and CcirProvided accessories International Telephone Language Code Ex. Deutschland is selectedEx. Francais is selected for Belgium