JVC HR-S9600EU specifications SET Just Clock, Start Clock Operation

Page 65

1– –:– –

2

1 2 3

45 6

78 9

0

1

MENU

2

3

4

4

3

6

7

OK	8

EN65

SET JUST CLOCK

The default setting is “OFF”. Set as desired by pressing %Þ, then press OK or #.

●For the Just clock function, ☞ "Just Clock" on page 64.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

SET CLOCK DATA SOURCE CHANNEL POSITION

The recorder is preset to receive clock setting and adjustment data from channel position 1. Press %Þto set the channel position to the number representing the station transmitting clock setting data, then press OK or #.

START CLOCK OPERATION

Press MENU.

NOTES:

●Just Clock (when set to "ON") adjusts the recorder's built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when . . .

–the recorder’s power is on.

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

–the recorder is in the Auto Satellite Prog Rec mode (☞ pg. 35).

–the recorder is in the Power Save mode (☞ pg. 12).

●If Just Clock is set to "ON", the recorder’s clock is automati- cally adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.

Image 65

Contents HR-S9600EU Safety Precautions Do not place the recorder For ItalyBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsBack of Recorder Video ConnectionConnect Recorder to TV EN Initial Settings Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayLanguage Code Preset Download Language for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage On-Screen Displays ENABLE/DISABLE ON-SCREEN DisplayReturn to Normal Screen 13 14Mode SET, then press Power Save ModeOK or # SAVE, then press OK or #to set to onLink Functions TV Auto Power OnLI NK NexTView LinkMode Colour System SetAbout Ntsc Playback Press %Þ to move the highlight bar pointer toLoad a Cassette Basic PlaybackPoint Start PlaybackActivate HIGH-SPEED Search Playback FeaturesPlayback Override Automatic Tracking Adjust TrackingManually Return to AutomaticDigital TBC/NR Digital 3RRepeat Playback Activate Instant ReviewInstant ReView Soundtrack SelectionTimeScan Audio signal during TimeScanMove the highlight bar pointer to Time Scan Audio TimeScanSpeed SP Speed LP Audio output Basic Recording Recording Features Locate Start Point Engage RECORD-PAUSE ModeResume Recording VHS Super VHS and VHSRecording Level Adjust AudioControl Screen Preparation S.T. Picture SystemEN Recording Or press Record on the recorder RecordingPlayback EN Timer Recording Timer ProgrammingSatellite Tuner Users Timer WarningÄTIMER indicator Time Express Timer ProgrammingBefore performing Express Timer Programming Timer Mode SET VPS/PDC ModeReturn to Normal Engage RECORDER’STE+ Check, Cancel And Replace ProgrammesFor Example Auto SP→LP TimerSET, then press OK or # Then press OK or #to selectAuto TIMER, then press Auto TimerOK or #to select either On or OFFBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording SET Remote Control Remote Control FunctionsRE-SUPPLY Power CodeControl Your TV Using Additional Buttons TV Multi-brand Remote ControlSET TV Brand Code Operate TVSatellite Tuner Multi-Brand Remote Control EN Special FeaturesSET Satellite Tuner Brand Code Operate Satellite TunerControl SET Mode Access Mode SETPreparation For Editing Select PictureIf the camcorder has an S-VIDEO output connector Recorder If the camcorder has no S-VIDEO output connector RecorderEdit From Camcorder EditingSynchro Editing Connector Lanc Cable not provided To Lanc connectorRepeat steps 4 6 as necessary Recorder PlayerEdit To Or From Another Video Recorder TV Receiver NEL or Or AV Provided AV mode Mode Another recorderYour recorder Your recorder TV Receiver Pin Scart CableAV2 Select Setting AV1 Select SettingEngage Audio Dubbing SET Input ModeStart Dubbing END Audio DubbingLocate END Point Insert EditingStart Editing Engage Insert EditingEND Insert Editing Press InsertRandom As- semble Editing Access R.A. Edit ScreenPrepare for Editing Load Source CassetteLocate EDIT-OUT Point Locate EDIT-IN PointStart R.A. Edit END R.A. EditAccess Initial SET Screen Access Main Menu ScreenAccess Jlip ID NO. SET Screen SET Jlip ID NumberTuner Connection ToSystem Connections Simple ConnectionsEN System Connections Connector ScartPerfect Connections Satellite Tuner UnitBasic Connections ConnectorBack of Recorder Mains outlet DecoderSelect Input Mode Connecting Using a DecoderConnect Decoder SET TunerRear View Connecting Using a Stereo SystemSpeaker Television Mains outlet Tuner Set Access Auto CH SETEN Subsi Diary Sett Ings Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Fine-Tuning Channels Already Stored Perform TuningSelect Channel to FINE-TUNEExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemClock Set Access Initial SETTurn the Recorder on SET Date and TimeStart Clock Operation SET Just ClockNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers Ä remain lit on the display panel. Is there Problem?Front View IndexInside View of Front Panel Rear View Remote Control Remote Control LCD Speci Fications PAL-type colour signal and CcirProvided accessories International Telephone Language Code Ex. Deutschland is selectedEx. Francais is selected for Belgium