Delete A Channel
Perform steps 1 and 2 of "Storing Channels Manually" on page 58 to access the Confirmation screen before continuing.
1 | SELECT ITEM |
Press %Þ @ #until the item you want to delete begins | |
blinking. | |
2 | DELETE CHANNEL |
Press . | |
● The item directly beneath the cancelled one moves | |
up one line. | |
| ● Repeat steps 1 and 2 as necessary. |
3 | CLOSE CONFIRMATION SCREEN |
Press MENU. |
Change Station Channel Position
Perform steps 1 and 2 of "Storing Channels Manually" on page 58 to access the Confirmation screen before continuing.
| SELECT ITEM |
|
|
|
|
|
| |||||
| Press %Þ @ #until the item you want to move begins | |||||||||||
| blinking. Then press OK and the station name (ID) and | |||||||||||
1 its channel (CH) number begin blinking. |
|
| ||||||||||
2 | SELECT NEW POSITION |
|
| |||||||||
Press %Þ @ #to move the station to the new channel | ||||||||||||
position, then press OK. |
|
|
|
|
|
| ||||||
Example: If you moved the station in position 4 to | ||||||||||||
|
|
|
| position 2, the stations originally in positions | ||||||||
|
|
|
| 2 and 3 each move down one space. |
| |||||||
|
| PR | CH | ID | PR | CH ID |
| PR | CH | ID | PR | CH ID |
| 01 | 25 | ARD | 08 | C26 | 01 | 25 | ARD | 08 | C26 | ||
| 02 | C08 | SKY1 | 09 | 55 WEST |
| 02 | C65 | RAI1 | 09 | 55 WEST | |
|
| 03 | 10 | ZDF | 10 | C24 SAT1 |
| 03 | C08 | SKY1 | 10 | C24 SAT1 |
|
| 04 | C65 | RAI1 | 11 | C23 OSF | 04 | 10 | ZDF | 11 | C23 OSF | |
|
| 05 | C31 | BBC1 | 12 | C25 ESPN | 05 | C31 | BBC1 | 12 | C25 ESPN | |
| 06 | C32 | BBC2 | 13 | – – – – | 06 | C32 | BBC2 | 13 | – – – – | ||
| 07 | C33 | 3SAT | 14 | – – – – | 07 | C33 | 3SAT | 14 | – – – – | ||
|
|
|
|
|
|
|
|
|
|
| ||
|
| [5°° | ] : MOVE |
|
|
|
|
|
|
| ||
|
|
| : MANUAL° | CH SET |
|
|
| |||||
|
|
|
| [5°°°] : MOVE = |
| |||||||
|
| [MENU] : EXIT |
|
|
| [MENU] : EXIT |
|
|
●Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3 Press MENU.
NOTE:
EN59
When Receiving A
Scrambled Broadcast
| 1 |
| SELECT DECODER MODE |
| Set "AV2 SELECT" to "DECODER" (☞ pg. 44). | ||
|
|
| ACCESS CONFIRMATION |
| 2 |
| SCREEN |
| Perform steps 1 and 2 of "Storing Channel Manually" on | ||
|
| page 58. | |
| 3 |
| SELECT POSITION |
| Press %Þ @ #to select the channel position broadcast- | ||
|
| ing scrambled programmes, then press OK twice. | |
| 4 |
| CHANGE DECODER SETTING |
| Press #until "OFF" (decoder setting) begins blinking, | ||
|
| and set it to "ON" by pressing %Þ. | |
|
|
| RETURN TO CONFIRMATION |
| 5 |
| SCREEN |
| Press OK. | ||
|
| ||
|
|
|
|
|
|
| ● Repeat steps 3 through 5 as necessary. |
|
|
|
|
| 6 |
| CLOSE CONFIRMATION SCREEN |
| Press MENU. | ||
|
|
|
|
ATTENTION
If channel positions are changed or deleted, the Guide Program numbers that have been set are reset.
●Example 1: If a channel is deleted, all the Guide Program numbers are reset.
●Example 2: If a channel is changed from position 4 to position 2, the Guide Program numbers above position 4 are reset.
●Example 3: If a channel is changed from position 4 to position 6, the Guide Program numbers above position 6 are reset.
*In Examples 2 and 3, if the channel is moved to position 10 before OK is pressed, the Guide Program numbers above position 10 are reset.
If an attempt is made at timer programming with
SHOWVIEW in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. ☞ “ATTENTION – Regarding Guide Program Number Set” on pg. 29.
Or perform “Guide Program Number Set” (☞ pg. 66).
The characters available for the station name (ID) are