JVC HR-S9600EU specifications Before performing Express Timer Programming

30ENTIMERRECORDING(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS SHOWVIEW
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
Press START +/–. (If you’re				– P1 –
	just starting out, “P1”		START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =
		[PROG] : EXIT
The front display panel looks like this:

	1	DAILY2
V	1
	2
P
S
/P	4	5
C
D
	7	8
		0

1

PROG 2

START+/–

– –:– –
			Y
3		L
		EK
	E
6	W
		P
		/L
	P
	S

9 3

4

4

3 OK

TV PROG+/–

			SP
	ENTER PROGRAMME
	START TIME
Press START +/– to enter				– P1 –
	the time you want		START				STOP
3 recording to start.
			21:00		=		– –:– –
			SP			VPS/PDC OFF
	● Press and hold START
	+/– to move in 30-		DATE				TV PROG
	minute increments, or		– –.– –					– –
	press and release	[+/–] =

	D
	AT
STOP+/–	E
	+
	/
	–
	￿

repeatedly to move 1	[PROG] : EXIT
minute at a time.
The front display panel looks like this:
	SP

		ENTER PROGRAMME STOP
4		TIME
	Press STOP +/– to enter the time you want recording to
		stop.
		● Press and hold STOP +/– to move in 30-minute
		increments, or press and release repeatedly to move
		1 minute at a time.

5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)