JVC HR-S9500EK setup guide Edit From Camcorder

Edit From

A Camcorder

1	2	3
		2
4	5	6
7	8	9
NUMBER "0"	0	4
		TV PROG
1

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

AIf the camcorder has no S-VIDEO output connector...

Recorder

		To rear panel PAUSE/
VIDEO	AUDIO input	R.A. EDIT connector

input
	Audio/Video Cable
	(not provided)	Mini-Plug Cable
	VIDEO OUT	(not provided)
		(JVC camcorder
		only)
Camcorder	AUDIO OUT
	EDIT
Player

33

You can use a camcorder as the source player and your video recorder as the recorder.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder’s AUDIO/VIDEO OUT
	connectors to the recorder’s front panel AUDIO/
	VIDEO input connectors.
	B If the camcorder has an S-VIDEO output connector...
	... connect the camcorder’s S-VIDEO OUT and
	AUDIO OUT connectors to the recorder’s front
	panel S-VIDEO and AUDIO input connectors.
	● When using a monaural camcorder, connect its
	AUDIO OUT connector to the AUDIO L input
	connector on your recorder.
	● When a Master Edit Control-equipped JVC camcorder
	is used, the camcorder is capable of controlling the
	recorder. Refer to the camcorder’s instruction manual
	for operating procedure.
2	SET RECORDER’S INPUT MODE
	Press NUMBER key “0” and/or TV PROG to select "F-1"
	for the AUDIO/VIDEO input connectors, or "S-1" for the
	AUDIO/S-VIDEO input connectors, depending on the
	connectors being used.
3	SET EDIT MODE
	See "Editing Mode Setting" on page 32.
4	START CAMCORDER
	Engage its Play mode.
5	START RECORDER
	Engage its Record mode.

BIf the camcorder has an S-VIDEO output connector...

Recorder

		To rear panel PAUSE/
	AUDIO	R.A. EDIT connector
S-VIDEO
	input
input
	Audio Cable (not provided)
	S-Video Cable (provided)	Mini-Plug Cable
	S-VIDEO	(not provided)
	OUT	(JVC camcorder
		only)

Camcorder

AUDIO OUT

EDIT

Player