JVC LPT1016-001A, 0105KTH-MW-BJ manual Safety Precautions, Use only discs marked with the following

Page 2

2 EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the unit for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

ATTENTION (VHS deck only)

1.This recorder can also receive SECAM colour television signals for recording and playback.

2.Recordings made of SECAM television signals produce monochrome pictures if played back on another video recorder of SECAM standard, or do not produce normal colour pictures if played back on another video recorder of PAL standard.

3.SECAM prerecorded cassettes or recordings made with a SECAM video recorder produce monochrome pictures when played back with this recorder.

IMPORTANT

8Please read the various precautions on pages 2 and 3 before

installing or operating the unit.

8It should be noted that it may be unlawful to re-record pre- recorded tapes, DVDs, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

CAUTION

A DVD/VCR IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VCR USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS DVD/VCR IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS DVD/VCR.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

REPRODUCTION OF LABELS

WARNING LABEL INSIDE OF THE UNIT

Use only discs marked with the following.

DVD

Audio CDs

(8 cm /12 cm disc)

(8 cm /12 cm disc)

Video CDs

Super Video CDs

(8 cm /12 cm disc)

(8 cm /12 cm disc)

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS”and “DTS 2.0+ Digital Out” are trademarks of Digital Theater Systems, Inc.

Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder. However, S-VHS recording is not possible with this model.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS recordings in the SP mode with regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

G-CODEis a trademark of Gemstar Development Corporation and is registered in the following countries: Australia, China, Hong Kong, Japan, South Korea, New Zealand, and Taiwan. SHOWVIEW is a trademark of Gemstar Development Corporation and is registered in the following countries: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Hungary, Iceland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Russia, Slovakia, South Africa, Spain, Sweden and Switzerland. The G-CODE/SHOWVIEWsystem is manufactured under license from Gemstar Development Corporation.

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature. However, for simplicity, only the term G-CODEwill be used in the instructions. If you use SHOWVIEW system, follow the same steps listed for the G-CODEsystem.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Image 2
Contents HR-XV38SAG HR-XV38SAS Safety Precautions Use only discs marked with the followingContents Unplayable Discs About DiscsPlayable Discs Region NumberCare and Handling of Discs File Structure of DiscsPlacing a Disc Open the disc trayFront View ON-SCREEN Display VHS deck Satellite Auto Recording Indicator N pgTape Remaining Time Indicator pg Counter Display Tape Speed SP/LP or EP* pgHow To Use E Button rt Button Enter ButtonSituate the unit Check the contentsBasic Connections Connect the unit to TVBack of TV Plug the end of the mains power cord into a mains outlet10 EN DVD deck Scan Mode SetSwitch the mode Turn on the unit12 EN 8To connect to a TV with S-VIDEO/AUDIO in connectorsBack of TV Audio in connectors Video ConnectionVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the video channelAuto Set Up 14 ENMonitor Set DVD deck Select the modeSelect the mode setting Return to the normal screen16 EN LanguageSelect the mode Select the DVD deckLanguage Code List 18 ENTo make corrections anytime during the process Clock SetStart the clock operation 20 EN Basic PlaybackPlayback Features Repeat Playback 22 ENInstant ReView Manual TrackingBasic Recording 24 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining TimeRecording Receiving Stereo and Bilingual ProgrammesPlayback Guide Program Number Set System Setup26 EN Access the G-CODEProgram screen Timer ProgrammingAccess the G-CODE/SHOWVIEWscreen Enter the G-CODEnumber28 EN Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials Guide Program Number SetExpress Timer Programming Cancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer modeConfirm the overlapping programmes When programmes overlap each otherCancel or change programme setting Select the programme to modify32 EN Recording modeInput Connector Input L-1 connector Press pStart playback Load the discPause playback PressAccess the PBC menu Locating a Desired Scene Using the DVD MenuAccess the DVD menu 34 ENLocating the Start Point of the Item or Skip the Item Zooming36 EN Select the subtitle language Access the menuSelect the time If you have specified a wrong selectionAngle Selection Select the audio setting38 EN Select the view angleVFP function Adjusting the picture quality Sound Effect 3D PhonicAccess the menu bar How to Access the On-Screen BarAccess the status bar 40 ENDuring playback, selects the subtitle language Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the audio language or sound track During Video CD/SVCD playback, selects the audio channelsOutline Precautions42 EN Control displayControl display appears on the TV screen.  pg Basic PlaybackSelect the group Press rt to select the desired group, then press eZooming a still picture 44 ENGroup/File Selection Engage the Record Pause mode Set the unit’s input modeSet the edit mode Make connections46 EN Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the source playerDubbing From DVD to VHSPrepare the audio device for dubbing 48 ENPlace a disc and load an MD For the digital audio deviceTurn off the unit Change the remote control codeSet the remote control code Display the codeOperate the TV 50 ENOperating a JVC TV Connecting To a Satellite Receiver Satellite receiver52 EN Make connectionsPress rt to move the highlight bar pointer to Access the Mode Set screenFunction Set VHS deck Function SET, then pressSubsidiary Settings 54 ENAuto Splp Timer on / OFF For Example56 EN Mode Set DVD deckAccess the DVD Set Up menu screen Set this item correctly according to the logo on the device Picture SettingsAudio Settings Parental Lock Others Settings58 EN Playback discsCountry/Area Code List for Parental Lock Tuner Set Access the Auto Channel Set screen60 EN Auto Channel SetManual Channel Set Swap Channel Position 62 ENDelete a Channel Select the channel Perform tuningSelect the channel to fine-tune FRQ number for the channel starts blinkingChild Lock Slide to the right You can disable the unit’s operation64 EN Set the Child LockTV System Information on Multi-System CompatibilityVHS deck Off-Air Recording Recorded tapeRecorded tape Playback equipment 66 ENTape-To-Tape Editing Recording circuitPlayback VHS deck PowerTape Transport VHS deck Playback DVD deckMP3/JPEG Files Playback DVD deck Input mode is not correct Set the input mode to L-1 or F-168 EN Recording VHS deckTimer Recording VHS deck Timer recording won’t workVIDEO/AUDIO VHS deck TUNER/TIMER VHS deck70 EN VIDEO/AUDIO DVD deckExpress Timer Programming Auto Channel Set Auto Set UpConnecting To a Dolby Digital Decoder or An Amplifier CODE/SHOWVIEW System SetupHR-XV38SAG/HR-XV38SAS