EN 15
Monitor Set (DVD deck)
You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for
For the multi colour system TV
When you use a multi colour system TV, you can change the colour system of this unit automatically by selecting “MULTI” options as the monitor type. In this case, the setting of this unit is changed to match the colour system of the loaded disc regardless the TV system setting.
( “ATTENTION” below)
ATTENTION
How to change the TV system between PAL and NTSC
APress and hold SCAN MODE on the unit for more
than 3 seconds while the unit is turned off.
The current TV system blinks on the front display panel.
BWhile the current TV system blinks, press w e to select “ntSc” (for NTSC) or “PAL” (for PAL), then press ENTER.
•If the current TV system stops blinking before you make the setting, start from step A again.
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote control to the right.
Slide to the right.
A Turn on the unit.
Press 1.
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C Access the DVD Set Up menu screen.
A Press SET UP. | PICTURE |
| |
B Press w e to select | MONITOR TYPE | 4:3LB | |
“ | PICTURE.” | PICTURE SOURCE | AUTO |
SCREEN SAVER | ON | ||
|
| MP3 / JPEG | MP3 |
D Select the mode.
Press rt to move H to “MONITOR TYPE,” then press
ENTER.
E Select the mode setting.
Press rt to select the desired setting, then press ENTER.
F Return to the normal screen.
Press SET UP.
* The default setting is bold in the table below.
8MONITOR TYPE
16:9 NORMAL / 16:9 MULTI NORMAL (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9 (wide TV). The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4:3.
16:9 AUTO / 16:9 MULTI AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
4:3 LB / 4:3 MULTI LB (Letter Box conversion): Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.
4:3 PS / 4:3 MULTI PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a
Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, “Pan&Scan” and “Letter Box.”
Pan&Scan
The right and left side of the image are cut off. The image fills the screen.
Letter Box
Black bands appear at the top and bottom of the image. The image itself appears in 16:9 aspect ratio.
NOTES:
●Even if ”4:3 PS” or ”4:3 MULTI PS” is selected, the screen size may become ”4:3 LB” or ”4:3 MULTI LB” with some DVD VIDEO. This depends on how they are recorded.
●When you select ”16:9 NORMAL”or ”16:9 MULTI NORMAL” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.