JVC LPT1016-001A, 0105KTH-MW-BJ manual 26 EN, System Setup, Guide Program Number Set

Page 26
[0-9] OR [ / ]
GUIDE PROG 2

26 EN

OPERATIONS ON VHS DECK (cont.)

G-CODE®/SHOWVIEWTM

System Setup

The G-CODEtimer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function.Simply key in the G-CODEnumber for the TV programme you wish to record (found in most TV listings) and the unit's timer is automatically programmed.

You have to set Guide Program numbers, which are assigned to each station for purposes of ShowView timer programming, for all the stations stored in your unit's memory to get proper results. Before G-CODEsetup you must have performed Auto Set Up. ( pg. 14)

IMPORTANT

After setting the Guide Program Numbers, channel positions may be incorrect if you stored or skipped channels. In this case, re-perform Guide Program Number settings.

INFORMATION

G-CODEand SHOWVIEW are different trademarks used to represent the same easy recording feature, but only the term G-CODEsystem will be used in the instructions. If you use the SHOWVIEW system, follow the same instructions listed for the G-CODEsystem.

Turn on the TV and select the video channel (or AV mode).

Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

Guide Program Number Set

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

B Access the Main Menu screen.

Press SET UP.

C Access the Initial Set screen.

Press rt to move the highlight bar (pointer) to “INITIAL SETUP,” then press ENTER or e.

D Access the Guide Program Set screen.

Press rt to move the highlight bar (pointer) to “G-CODE/ SHOWVIEW SETUP,” then press ENTER or e.

E Enter the Guide Program number.

Press rt or number keys to

G-CODE/SHOWVIEW SETUP

enter the Guide Program

 

 

 

 

number for the desired

GUIDE PROG

 

 

TV PROG

station as shown in the TV

 

 

2

5

listings. Then press ENTER or

 

 

 

 

e.

 

 

 

 

 

 

 

 

 

 

[0-9] OR [ /

]

 

 

 

 

 

 

 

 

 

 

F Enter the Receiving channel position number.

Then press rt or number keys to input the number of the units channel position on which the Guide Program numbers broadcast is received by the unit. Then press ENTER or e.

If the satellite broadcast is received on your unit's auxiliary channel “L-1,” select “L-1” for the channel position.

Repeat steps E and F as necessary.

G-CODE/SHOWVIEW SETUP

TV PROG

5

G Return to the normal screen.

Press SET UP.

Guide Program Number

Guide Program (GUIDE PROG) numberrefers to the assigned TV station numbers,according to broadcast area, for G-CODEtimer recording. The Guide Program numbers can be found in most TV listings.

Image 26
Contents HR-XV38SAG HR-XV38SAS Safety Precautions Use only discs marked with the followingContents Unplayable Discs About DiscsPlayable Discs Region NumberCare and Handling of Discs File Structure of DiscsPlacing a Disc Open the disc trayFront View ON-SCREEN Display VHS deck Satellite Auto Recording Indicator N pgTape Remaining Time Indicator pg Counter Display Tape Speed SP/LP or EP* pgHow To Use E Button rt Button Enter ButtonSituate the unit Check the contentsBasic Connections Connect the unit to TVBack of TV Plug the end of the mains power cord into a mains outlet10 EN DVD deck Scan Mode SetSwitch the mode Turn on the unit12 EN 8To connect to a TV with S-VIDEO/AUDIO in connectorsBack of TV Audio in connectors Video ConnectionVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the video channelAuto Set Up 14 ENMonitor Set DVD deck Select the modeSelect the mode setting Return to the normal screen16 EN LanguageSelect the mode Select the DVD deckLanguage Code List 18 ENTo make corrections anytime during the process Clock SetStart the clock operation 20 EN Basic PlaybackPlayback Features Repeat Playback 22 ENInstant ReView Manual TrackingBasic Recording 24 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining TimeRecording Receiving Stereo and Bilingual ProgrammesPlayback Guide Program Number Set System Setup26 EN Access the G-CODEProgram screen Timer ProgrammingAccess the G-CODE/SHOWVIEWscreen Enter the G-CODEnumber28 EN Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials Guide Program Number SetExpress Timer Programming Cancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer modeConfirm the overlapping programmes When programmes overlap each otherCancel or change programme setting Select the programme to modify32 EN Recording modeInput Connector Input L-1 connector Press pStart playback Load the discPause playback PressAccess the PBC menu Locating a Desired Scene Using the DVD MenuAccess the DVD menu 34 ENLocating the Start Point of the Item or Skip the Item Zooming36 EN Select the subtitle language Access the menuSelect the time If you have specified a wrong selectionAngle Selection Select the audio setting38 EN Select the view angleVFP function Adjusting the picture quality Sound Effect 3D PhonicAccess the menu bar How to Access the On-Screen BarAccess the status bar 40 ENDuring playback, selects the subtitle language Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the audio language or sound track During Video CD/SVCD playback, selects the audio channelsOutline Precautions42 EN Control displayControl display appears on the TV screen.  pg Basic PlaybackSelect the group Press rt to select the desired group, then press eZooming a still picture 44 ENGroup/File Selection Engage the Record Pause mode Set the unit’s input modeSet the edit mode Make connections46 EN Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the source playerDubbing From DVD to VHSPrepare the audio device for dubbing 48 ENPlace a disc and load an MD For the digital audio deviceTurn off the unit Change the remote control codeSet the remote control code Display the codeOperate the TV 50 ENOperating a JVC TV Connecting To a Satellite Receiver Satellite receiver52 EN Make connectionsPress rt to move the highlight bar pointer to Access the Mode Set screenFunction Set VHS deck Function SET, then pressSubsidiary Settings 54 ENAuto Splp Timer on / OFF For Example56 EN Mode Set DVD deckAccess the DVD Set Up menu screen Set this item correctly according to the logo on the device Picture SettingsAudio Settings Parental Lock Others Settings58 EN Playback discsCountry/Area Code List for Parental Lock Tuner Set Access the Auto Channel Set screen60 EN Auto Channel SetManual Channel Set Swap Channel Position 62 ENDelete a Channel Select the channel Perform tuningSelect the channel to fine-tune FRQ number for the channel starts blinkingChild Lock Slide to the right You can disable the unit’s operation64 EN Set the Child LockTV System Information on Multi-System CompatibilityVHS deck Off-Air Recording Recorded tapeRecorded tape Playback equipment 66 ENTape-To-Tape Editing Recording circuitPlayback VHS deck PowerTape Transport VHS deck Playback DVD deckMP3/JPEG Files Playback DVD deck Input mode is not correct Set the input mode to L-1 or F-168 EN Recording VHS deckTimer Recording VHS deck Timer recording won’t workVIDEO/AUDIO VHS deck TUNER/TIMER VHS deck70 EN VIDEO/AUDIO DVD deckExpress Timer Programming Auto Channel Set Auto Set UpConnecting To a Dolby Digital Decoder or An Amplifier CODE/SHOWVIEW System SetupHR-XV38SAG/HR-XV38SAS