52 EN | SYSTEM CONNECTIONS (cont.) |
Connecting To A Dolby Digital Decoder or An Amplifier With A
These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with
Make connections.
Connect the optical cable between the unit and the Dolby Digital Decoder or amplifier with a
Dolby Digital Decoder or amplifier with
To DIGITAL AUDIO input
Optical cable (not provided)
DIGITAL AUDIO OUT
Note for connection:
Remove the connector cover from the unit and remove the protection cap from the cable.
NOTES:
●For Dolby Digital sound, set “DIGITAL AUDIO OUTPUT” to “DOLBY DIGITAL/PCM”. ( pg. 57)
●For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/ PCM”. ( pg. 57)
CAUTIONS:
●This unit has a dynamic range of more than 80 dB with regards to its
●Some speakers and televisions are specially shielded to prevent television interference. If both are of the