JVC 0105KTH-MW-BJ, LPT1016-001A manual Auto Splp Timer on / OFF, For Example

Page 55

EN 55

8AUTO SP]LP TIMER — ON / OFF

When this function is set to “ON,” the unit automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer- recording in SP mode.

For Example:

Recording a programme of 210 minutes in length onto a 180- minute tape

Approximately 150 minutes	Approximately 60 minutes
SP mode	LP mode

Total 210 minutes

Make sure you set this function to “ON,” before the timer- recording starts.

NOTES:

●If you have programmed the unit to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set “AUTO SP]LP TIMER” to “ON.” In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

●In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape.

●There may be some noise and sound disturbance at the point on the tape where the unit switches from SP to LP mode.

●The Auto SP]LP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes longer than E-180, or with some tapes of shorter lengths.

8VIDEO STABILIZER — ON / OFF

When this function is set to “ON,” you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder.

NOTES:

●When you finish viewing a tape, be sure to set this function to “OFF.”

●Regardless of the setting, this function has no effect during recording and during special effects playback.

●The on-screen display may jitter vertically when this function is set to “ON.”

●To watch recordings with close-caption, set this function to “OFF.”

8AUTO POWER OFF — 3H / OFF

When this function is set to “3H,” the unit is turned off automatically if no operation is done within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on the screen 3 minutes before the unit is turned off.

Image 55

Contents HR-XV38SAG HR-XV38SAS Use only discs marked with the following Safety PrecautionsContents Region Number About DiscsPlayable Discs Unplayable DiscsOpen the disc tray File Structure of DiscsPlacing a Disc Care and Handling of DiscsFront View Counter Display Tape Speed SP/LP or EP* pg Satellite Auto Recording Indicator N pgTape Remaining Time Indicator pg ON-SCREEN Display VHS deckE Button rt Button Enter Button How To UseConnect the unit to TV Check the contentsBasic Connections Situate the unit10 EN Plug the end of the mains power cord into a mains outletBack of TV Turn on the unit Scan Mode SetSwitch the mode DVD deckVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsBack of TV Audio in connectors 12 ENSet the video channel Access the Video Channel Set modeExit the Video Channel Set mode Video Channel Set14 EN Auto Set UpReturn to the normal screen Select the modeSelect the mode setting Monitor Set DVD deckLanguage 16 ENSelect the DVD deck Select the mode18 EN Language Code ListStart the clock operation Clock SetTo make corrections anytime during the process Basic Playback 20 ENPlayback Features Manual Tracking 22 ENInstant ReView Repeat PlaybackBasic Recording Tape Remaining Time Recording FeaturesInstant Timer Recording ITR 24 ENPlayback Receiving Stereo and Bilingual ProgrammesRecording 26 EN System SetupGuide Program Number Set Enter the G-CODEnumber Timer ProgrammingAccess the G-CODE/SHOWVIEWscreen Access the G-CODEProgram screenGuide Program Number Set Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials 28 ENExpress Timer Programming Return to the timer mode Disengage the timer modeAccess the Programme Check screen Cancel or change a programmeSelect the programme to modify When programmes overlap each otherCancel or change programme setting Confirm the overlapping programmesPress p Recording modeInput Connector Input L-1 connector 32 ENPress Load the discPause playback Start playback34 EN Locating a Desired Scene Using the DVD MenuAccess the DVD menu Access the PBC menuZooming Locating the Start Point of the Item or Skip the Item36 EN If you have specified a wrong selection Access the menuSelect the time Select the subtitle languageSelect the view angle Select the audio setting38 EN Angle SelectionSound Effect 3D Phonic VFP function Adjusting the picture quality40 EN How to Access the On-Screen BarAccess the status bar Access the menu barDuring Video CD/SVCD playback, selects the audio channels Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the audio language or sound track During playback, selects the subtitle languageControl display Precautions42 EN OutlinePress rt to select the desired group, then press e Basic PlaybackSelect the group Control display appears on the TV screen. pgGroup/File Selection 44 ENZooming a still picture Make connections Set the unit’s input modeSet the edit mode Engage the Record Pause modeStart the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck 46 ENFrom DVD to VHS DubbingFor the digital audio device 48 ENPlace a disc and load an MD Prepare the audio device for dubbingDisplay the code Change the remote control codeSet the remote control code Turn off the unitOperating a JVC TV 50 ENOperate the TV Satellite receiver Connecting To a Satellite ReceiverMake connections 52 ENFunction SET, then press Access the Mode Set screenFunction Set VHS deck Press rt to move the highlight bar pointer to54 EN Subsidiary SettingsFor Example Auto Splp Timer on / OFFAccess the DVD Set Up menu screen Mode Set DVD deck56 EN Audio Settings Picture SettingsSet this item correctly according to the logo on the device Playback discs Others Settings58 EN Parental LockCountry/Area Code List for Parental Lock Auto Channel Set Access the Auto Channel Set screen60 EN Tuner SetManual Channel Set Delete a Channel 62 ENSwap Channel Position FRQ number for the channel starts blinking Perform tuningSelect the channel to fine-tune Select the channelSet the Child Lock Slide to the right You can disable the unit’s operation64 EN Child LockRecorded tape Information on Multi-System CompatibilityVHS deck Off-Air Recording TV SystemRecording circuit 66 ENTape-To-Tape Editing Recorded tape Playback equipmentPlayback DVD deck PowerTape Transport VHS deck Playback VHS deckRecording VHS deck Input mode is not correct Set the input mode to L-1 or F-168 EN MP3/JPEG Files Playback DVD deckTimer recording won’t work Timer Recording VHS deckVIDEO/AUDIO DVD deck TUNER/TIMER VHS deck70 EN VIDEO/AUDIO VHS deckCODE/SHOWVIEW System Setup Auto Channel Set Auto Set UpConnecting To a Dolby Digital Decoder or An Amplifier Express Timer ProgrammingHR-XV38SAG/HR-XV38SAS