JVC 0105KTH-MW-BJ, LPT1016-001A manual Picture Settings, Audio Settings

Page 57

EN 57

* The default setting is bold in the table below.

Picture Settings

8MONITOR TYPE —

16:9 NORMAL/16:9 MULTI NORMAL / 16:9 AUTO/16:9 MULTI AUTO /

4:3 LB/4:3 MULTI LB /

4:3 PS/4:3 MULTI PS

You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to “Monitor Set (DVD deck)” ( pg. 15).

8PICTURE SOURCE —

VIDEO (NORMAL) / VIDEO (ACTIVE) / FILM / AUTO

You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).

Normally set to “AUTO.”

VIDEO (NORMAL): Suitable for playing back a video source disc with relatively a few movements.

VIDEO (ACTIVE): Suitable for playing back a video source disc with relatively a lot of movements.

FILM: Suitable for playing back a film or progressive source disc.

AUTO: Used to play back a disc containing both video and film source materials. This unit recognizes the picture type (film or video source) of the current disc according to the disc information.

●If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes.

8SCREEN SAVER — ON / OFF

The TV screen may be burned out if a static picture is displayed for a long time. When this function is set to “ON,” the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu is displayed for over 5 minutes.

NOTE:

This function is not available for Audio CDs and MP3 discs.

8FILE TYPE — AUDIO / STILL PICTURE

You can select files to play back, when both MP3 files and JPEG files are recorded on a disc.

AUDIO: Select this to play back MP3 files.

STILL PICTURE: Select this to play back JPEG files.

NOTE:

You cannot access the DVD Set Up screen and “X” appears on the TV screen if a disc is already placed.

Audio Settings

8DIGITAL AUDIO OUTPUT —

PCM ONLY / DOLBY DIGITAL/PCM / STREAM/PCM

Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector on the rear of unit.

Set this item correctly according to the logo on the device.

It is not necessary to set this mode when you connect no device to the DIGITAL AUDIO OUT connector.

PCM ONLY: Select this when connecting to a device bearing neither Dolby Digital nor DTS logo, or a digital recorder.

DOLBY DIGITAL/PCM: Select this when connecting an amplifier or a decoder bearing Dolby Digital (without DTS) logo.

STREAM/PCM: Select this when connecting an amplifier or a decoder bearing both Dolby Digital and DTS logos.

8ANALOG DOWNMIX — DOLBY SURROUND / STEREO

Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This setting affects only the analogue audio output signal from the AUDIO OUT connectors when playing back a DVD VIDEO disc recorded with surround multichannel audio.

DOLBY SURROUND: Select this when you enjoy multichannel surround audio by connecting the unit’s analogue AUDIO OUTPUT connectors (DVD) to a surround decoder or an internal amplifier.

STEREO: Select this when you enjoy conventional 2-channel stereo audio by connecting the unit’s analogue AUDIO OUTPUT connectors (DVD) to a stereo amplifier/receiver or TV, or when you dub audio of a DVD VIDEO disc recorded with surround audio to your MD, cassette, etc.

8D. RANGE CONTROL —

WIDE RANGE / NORMAL / TV MODE

The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.

This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. WIDE RANGE: Select this to inactivate this function when you

enjoy wide dynamic range programme.

NORMAL: Normally select this setting to activate this function.

TV MODE: Select this when you hear the sound through the TV's speaker(s).

8OUTPUT LEVEL — STANDARD / LOW

You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment.

STANDARD: Normally select this.

LOW: The output level of analog audio is lowered.

Page 56 Page 58
Image 57
Page 56 Page 58
Contents HR-XV38SAG HR-XV38SAS Use only discs marked with the following Safety PrecautionsContents Playable Discs About DiscsUnplayable Discs Region NumberPlacing a Disc File Structure of DiscsCare and Handling of Discs Open the disc trayFront View Tape Remaining Time Indicator pg Satellite Auto Recording Indicator N pgON-SCREEN Display VHS deck Counter Display Tape Speed SP/LP or EP* pgE Button rt Button Enter Button How To UseBasic Connections Check the contentsSituate the unit Connect the unit to TVPlug the end of the mains power cord into a mains outlet 10 ENBack of TV Switch the mode Scan Mode SetDVD deck Turn on the unitBack of TV Audio in connectors 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Video ConnectionExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set Set the video channel14 EN Auto Set UpSelect the mode setting Select the modeMonitor Set DVD deck Return to the normal screenLanguage 16 ENSelect the DVD deck Select the mode18 EN Language Code ListClock Set Start the clock operationTo make corrections anytime during the process Basic Playback 20 ENPlayback Features Instant ReView 22 ENRepeat Playback Manual TrackingBasic Recording Instant Timer Recording ITR Recording Features24 EN Tape Remaining TimeReceiving Stereo and Bilingual Programmes PlaybackRecording System Setup 26 ENGuide Program Number Set Access the G-CODE/SHOWVIEWscreen Timer ProgrammingAccess the G-CODEProgram screen Enter the G-CODEnumberTo Timer-Record Weekly Or Daily Serials Engage the unit’s timer mode28 EN Guide Program Number SetExpress Timer Programming Access the Programme Check screen Disengage the timer modeCancel or change a programme Return to the timer modeCancel or change programme setting When programmes overlap each otherConfirm the overlapping programmes Select the programme to modifyInput Connector Input L-1 connector Recording mode32 EN Press pPause playback Load the discStart playback PressAccess the DVD menu Locating a Desired Scene Using the DVD MenuAccess the PBC menu 34 ENZooming Locating the Start Point of the Item or Skip the Item36 EN Select the time Access the menuSelect the subtitle language If you have specified a wrong selection38 EN Select the audio settingAngle Selection Select the view angleSound Effect 3D Phonic VFP function Adjusting the picture qualityAccess the status bar How to Access the On-Screen BarAccess the menu bar 40 ENDuring playback, selects the audio language or sound track Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the subtitle language During Video CD/SVCD playback, selects the audio channels42 EN PrecautionsOutline Control displaySelect the group Basic PlaybackControl display appears on the TV screen.  pg Press rt to select the desired group, then press e44 EN Group/File SelectionZooming a still picture Set the edit mode Set the unit’s input modeEngage the Record Pause mode Make connectionsEngage the Record Pause mode of the recording deck Set the input mode of recording deck46 EN Start the source playerFrom DVD to VHS DubbingPlace a disc and load an MD 48 ENPrepare the audio device for dubbing For the digital audio deviceSet the remote control code Change the remote control codeTurn off the unit Display the code50 EN Operating a JVC TVOperate the TV Satellite receiver Connecting To a Satellite ReceiverMake connections 52 ENFunction Set VHS deck Access the Mode Set screenPress rt to move the highlight bar pointer to Function SET, then press54 EN Subsidiary SettingsFor Example Auto Splp Timer on / OFFMode Set DVD deck Access the DVD Set Up menu screen56 EN Picture Settings Audio SettingsSet this item correctly according to the logo on the device 58 EN Others SettingsParental Lock Playback discsCountry/Area Code List for Parental Lock 60 EN Access the Auto Channel Set screenTuner Set Auto Channel SetManual Channel Set 62 EN Delete a ChannelSwap Channel Position Select the channel to fine-tune Perform tuningSelect the channel FRQ number for the channel starts blinking64 EN Slide to the right You can disable the unit’s operationChild Lock Set the Child LockVHS deck Off-Air Recording Information on Multi-System CompatibilityTV System Recorded tapeTape-To-Tape Editing 66 ENRecorded tape Playback equipment Recording circuitTape Transport VHS deck PowerPlayback VHS deck Playback DVD deck68 EN Input mode is not correct Set the input mode to L-1 or F-1MP3/JPEG Files Playback DVD deck Recording VHS deckTimer recording won’t work Timer Recording VHS deck70 EN TUNER/TIMER VHS deckVIDEO/AUDIO VHS deck VIDEO/AUDIO DVD deckConnecting To a Dolby Digital Decoder or An Amplifier Auto Channel Set Auto Set UpExpress Timer Programming CODE/SHOWVIEW System SetupHR-XV38SAG/HR-XV38SAS
Top Page Image Contents