JVC 0105KTH-MW-BJ, LPT1016-001A manual Contents

Page 3

EN 3

POWER SYSTEM:

This set operates on voltage of AC110 240 V~ (Rating), AC90

260 V ~ (Operating), 50Hz/60Hz with automatic switching.

The 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “!” shows ON.

The socket outlet shall be installed near the equipment and easily accessible, or the mains plug or an appliance couplar shall remain readily operable.

Video tapes recorded with this unit in the LP (Long Play) or EP (Extended Play) mode cannot be played back on a single-speed video recorder. (VHS deck only)

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the unit, remote control or video cassette.

1.DO NOT place the unit —

in an environment prone to extreme temperatures or humidity.

in direct sunlight.

in a dusty environment.

in an environment where strong magnetic fields are generated.

on a surface that is unstable or subject to vibration.

2.DO NOT block the unit’s ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

3.DO NOT place heavy objects on the unit or remote control.

4.DO NOT place anything which might spill on top of the unit or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5.DO NOT expose the apparatus to dripping or splashing.

6.DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this unit.

7.DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8.AVOID violent shocks to the unit during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the unit when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the unit turned on for a few hours to let the moisture dry.

ATTENTION

To mobile phone user:

Using a mobile phone in the vicinity of the unit may cause picture vibration on the TV screen or change the screen to a blue back display.

On placing the unit:

Some TVs or other appliances generate strong magnetic fields. Do not place such appliances on top of the unit as it may cause picture disturbance.

Contents

 

SAFETY FIRST

2

Safety Precautions

2

DISC INFORMATION

4

About Discs

4

INDEX

6

INSTALLING YOUR NEW UNIT

9

Basic Connections

9

Component Video Connection (DVD deck)

10

Scan Mode Set (DVD deck)

11

S-VIDEO Connection (DVD deck)

12

INITIAL SETTINGS

13

Video Channel Set

13

Auto Set Up

14

Monitor Set (DVD deck)

15

Language

16

Clock Set

19

OPERATIONS ON VHS DECK

20

Basic Playback

20

Playback Features

21

Basic Recording

23

Recording Features

24

B.E.S.T. Picture System

25

G-CODE®/SHOWVIEWTMSystem Setup

26

G-CODE®/SHOWVIEWTMTimer Programming

27

Express Timer Programming

29

Automatic Satellite Programme Recording

32

OPERATIONS ON DVD DECK

33

Basic Playback

33

Playback Features

34

Using the on-screen bar

40

MP3/JPEG files Playback

42

EDITING (VHS DECK)

45

Edit From A Camcorder

45

Edit To Or From Another Video Recorder

46

Dubbing (from DVD to VHS)

47

EDITING (DVD DECK)

48

Digital Audio Dubbing

48

REMOTE CONTROL

49

Remote Control Functions

49

SYSTEM CONNECTIONS

51

Connecting To A Satellite Receiver

51

Connecting To A Dolby Digital Decoder or An Amplifier With A

Built-in DTS (DVD deck)

52

SUBSIDIARY SETTINGS

53

Function Set (VHS deck)

53

Mode Set (DVD deck)

56

Tuner Set

60

Information on Multi-System Compatibility (VHS deck)

65

TROUBLESHOOTING

67

SPECIFICATIONS

70

LIST OF TERMS

71

Image 3
Contents HR-XV38SAG HR-XV38SAS Use only discs marked with the following Safety PrecautionsContents Region Number About DiscsPlayable Discs Unplayable DiscsOpen the disc tray File Structure of DiscsPlacing a Disc Care and Handling of DiscsFront View Counter Display Tape Speed SP/LP or EP* pg Satellite Auto Recording Indicator N pgTape Remaining Time Indicator pg ON-SCREEN Display VHS deckE Button rt Button Enter Button How To UseConnect the unit to TV Check the contentsBasic Connections Situate the unitPlug the end of the mains power cord into a mains outlet 10 ENBack of TV Turn on the unit Scan Mode SetSwitch the mode DVD deckVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsBack of TV Audio in connectors 12 ENSet the video channel Access the Video Channel Set modeExit the Video Channel Set mode Video Channel Set14 EN Auto Set UpReturn to the normal screen Select the modeSelect the mode setting Monitor Set DVD deckLanguage 16 ENSelect the DVD deck Select the mode18 EN Language Code ListClock Set Start the clock operationTo make corrections anytime during the process Basic Playback 20 ENPlayback Features Manual Tracking 22 ENInstant ReView Repeat PlaybackBasic Recording Tape Remaining Time Recording FeaturesInstant Timer Recording ITR 24 ENReceiving Stereo and Bilingual Programmes PlaybackRecording System Setup 26 ENGuide Program Number Set Enter the G-CODEnumber Timer ProgrammingAccess the G-CODE/SHOWVIEWscreen Access the G-CODEProgram screenGuide Program Number Set Engage the unit’s timer modeTo Timer-Record Weekly Or Daily Serials 28 ENExpress Timer Programming Return to the timer mode Disengage the timer modeAccess the Programme Check screen Cancel or change a programmeSelect the programme to modify When programmes overlap each otherCancel or change programme setting Confirm the overlapping programmesPress p Recording modeInput Connector Input L-1 connector 32 ENPress Load the discPause playback Start playback34 EN Locating a Desired Scene Using the DVD MenuAccess the DVD menu Access the PBC menuZooming Locating the Start Point of the Item or Skip the Item36 EN If you have specified a wrong selection Access the menuSelect the time Select the subtitle languageSelect the view angle Select the audio setting38 EN Angle SelectionSound Effect 3D Phonic VFP function Adjusting the picture quality40 EN How to Access the On-Screen BarAccess the status bar Access the menu barDuring Video CD/SVCD playback, selects the audio channels Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the audio language or sound track During playback, selects the subtitle languageControl display Precautions42 EN OutlinePress rt to select the desired group, then press e Basic PlaybackSelect the group Control display appears on the TV screen.  pg44 EN Group/File SelectionZooming a still picture Make connections Set the unit’s input modeSet the edit mode Engage the Record Pause modeStart the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck 46 ENFrom DVD to VHS DubbingFor the digital audio device 48 ENPlace a disc and load an MD Prepare the audio device for dubbingDisplay the code Change the remote control codeSet the remote control code Turn off the unit50 EN Operating a JVC TVOperate the TV Satellite receiver Connecting To a Satellite ReceiverMake connections 52 ENFunction SET, then press Access the Mode Set screenFunction Set VHS deck Press rt to move the highlight bar pointer to54 EN Subsidiary SettingsFor Example Auto Splp Timer on / OFFMode Set DVD deck Access the DVD Set Up menu screen56 EN Picture Settings Audio SettingsSet this item correctly according to the logo on the device Playback discs Others Settings58 EN Parental LockCountry/Area Code List for Parental Lock Auto Channel Set Access the Auto Channel Set screen60 EN Tuner SetManual Channel Set 62 EN Delete a ChannelSwap Channel Position FRQ number for the channel starts blinking Perform tuningSelect the channel to fine-tune Select the channelSet the Child Lock Slide to the right You can disable the unit’s operation64 EN Child LockRecorded tape Information on Multi-System CompatibilityVHS deck Off-Air Recording TV SystemRecording circuit 66 ENTape-To-Tape Editing Recorded tape Playback equipmentPlayback DVD deck PowerTape Transport VHS deck Playback VHS deckRecording VHS deck Input mode is not correct Set the input mode to L-1 or F-168 EN MP3/JPEG Files Playback DVD deckTimer recording won’t work Timer Recording VHS deckVIDEO/AUDIO DVD deck TUNER/TIMER VHS deck70 EN VIDEO/AUDIO VHS deckCODE/SHOWVIEW System Setup Auto Channel Set Auto Set UpConnecting To a Dolby Digital Decoder or An Amplifier Express Timer ProgrammingHR-XV38SAG/HR-XV38SAS