REMOTE CONTROL | EN 49 |
Remote Control Functions
Remote A/B/C/D Code Switching
The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your unit is initially set to respond to A code signals. You can easily modify your unit to respond to B, C or D code signals.
Before performing the following steps:
Slide the TV/VCR/DVD switch on the remote control to the right.
Slide to the right.
On the remote control
Keep pressing VCR down during steps A – B.
A Change the remote control code.
Press the number key “1” for A, “2” for B, “3” for C or “4” for D.
B Set the remote control code.
Press ENTER to set the code.
On the unit
C Turn off the unit.
Press 1.
D Display the code.
Press 4 on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.
●If the code displayed on the front display panel is different from the code set on the remote control, go to step E.
E Change the unit’s code.
Press 8 on the remote control. The code currently set on the remote control will be applied to the unit.