OPERATIONS ON DVD DECK | EN 33 |
Basic Playback
●Turn on the TV and select the VCR channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote control to the right.
A Load the disc.
●For details, refer to “Placing a Disc” ( pg. 5).
B Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C Start playback. |
Press 4. |
Example: DVD VIDEO
Title number | Chapter number |
Slide to the right.
ATTENTION
●You can not use the DVD deck when the VCR deck is in the Automatic Satellite Recording standby and recording mode.
●You can use the DVD deck when the VCR deck is in the timer standby mode.
●If the unit does not accept an operation, appears on the TV screen. (Operations are occasionally unacceptable even if is not displayed.)
To play back a MP3/JPEG disc, see pages 42 – 44.
Playback time
●You can switch the display on the front display panel between the title/chapter/track number and the playback time by pressing –
●It may take a few seconds to start playback.
●When inserting a DVD or Video CD disc, a menu display may appear on the TV screen. To play back from the menu, refer to
“Locating a Desired Scene Using the Menu of the Video CD with Playback Control (PBC) Function” ( pg. 34) or “Locating a Desired Scene Using the DVD Menu” ( pg. 34).
D Pause playback.
Press 9.
●To resume normal playback, press 4.
E Stop playback.
Press 8.
●When “RESUME” ( pg. 58) is “ON,” the unit memorizes the position on the disc where you have interrupted playback.
●Press x on the DVD deck to open the disc tray, then remove the disc.