EN 23
Basic Recording
●Turn on the TV and select the video channel (or AV mode).
●Slide the TV/VCR/DVD switch on the remote control to the right.
Slide to the right.
A Load a cassette.
Insert a cassette with the record safety tab intact.
●The unit’s power comes on automatically and the counter is reset to 0:00:00.
●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” ( pg. 54).
B Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C Choose a programme.
D Set the tape speed.
Press p. The current setting appears on the front display panel or TV screen. Press p again to change the setting while the tape speed is displayed on the TV screen.
●Each time you press p, the mode changes as follows. SP{LP (or EP*)
*EP is for NTSC only.
E Start recording.
Press and hold 7 and press 4 on the remote control, or press 7 on the unit.
B.E.S.T. works at the beginning of both the first SP and the first LP recording after inserting the cassette. ( pg. 25)
F Pause/Resume recording.
Press 9. Press 4 to resume recording.
●You can select channel during the Record Pause mode.
G Stop recording.
Press 8. Then press x on the VHS deck to remove the cassette.
Recording Resume Function
If there is a power outage during recording, Instant Timer Recording, or timer recording ( pg. 24, 29), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later,
cover the hole with adhesive tape. Record safety tab
Press PR +/– or the number keys to select the channel you wish to record.