JVC LPT1016-001A 24 EN, Recording Features, Instant Timer Recording ITR, Tape Remaining Time

Page 24

24 EN

OPERATIONS ON VHS DECK (cont.)

Recording Features

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

Record One Programme While Watching Another

Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the unit’s PR buttons is recorded on the tape.

NOTE:

You can also use the DVD deck in the following cases. Before use, be sure to turn on the unit and select the DVD deck.

●During recording

●During timer recording

●During timer standby mode

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished.

1Start recording.

Press 7 on the unit.

2Engage the ITR mode.

3Set the recording duration.

If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.

NOTES:

●You can only perform ITR using the 7 button on the unit’s front panel.

●When the end of the tape is reached during Instant Timer Recording, the unit is turned off and “” and “$” blink on the front display panel.

●When the end of the tape is reached during timer recording, the unit is turned off and “7”, “4” and “#” blink on the front display panel.

Elapsed Recording Time Indication

1Set the counter display.

Press – –:– – until a counter reading appears on the front display panel.

2Reset the counter.

Press 0000 before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press – –:– – until the time remaining on the tape appears.

●The front display panel shows the tape remaining time with “:” displayed.

●By pressing the – –:– – button, you can change the display to show the channel position, clock time, counter reading, and tape remaining time.

*The channel position is not displayed during playback.

NOTES:

●When you press – –:––, the on-screen display appears on the TV screen for 5 seconds.

●Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear with “:” blinking, or the display may blink on occasion.

Press 7 again. “” blinks and “0:30” appears on the front display panel.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents HR-XV38SAG HR-XV38SAS Safety Precautions Use only discs marked with the followingContents About Discs Playable DiscsUnplayable Discs Region NumberFile Structure of Discs Placing a DiscCare and Handling of Discs Open the disc trayFront View Satellite Auto Recording Indicator N pg Tape Remaining Time Indicator pgON-SCREEN Display VHS deck Counter Display Tape Speed SP/LP or EP* pgHow To Use E Button rt Button Enter ButtonCheck the contents Basic ConnectionsSituate the unit Connect the unit to TVPlug the end of the mains power cord into a mains outlet 10 ENBack of TV Scan Mode Set Switch the modeDVD deck Turn on the unit8To connect to a TV with S-VIDEO/AUDIO in connectors Back of TV Audio in connectors12 EN Video ConnectionAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set Set the video channelAuto Set Up 14 ENSelect the mode Select the mode settingMonitor Set DVD deck Return to the normal screen16 EN LanguageSelect the mode Select the DVD deckLanguage Code List 18 ENClock Set Start the clock operationTo make corrections anytime during the process 20 EN Basic PlaybackPlayback Features 22 EN Instant ReViewRepeat Playback Manual TrackingBasic Recording Recording Features Instant Timer Recording ITR24 EN Tape Remaining TimeReceiving Stereo and Bilingual Programmes PlaybackRecording System Setup 26 ENGuide Program Number Set Timer Programming Access the G-CODE/SHOWVIEWscreenAccess the G-CODEProgram screen Enter the G-CODEnumberEngage the unit’s timer mode To Timer-Record Weekly Or Daily Serials28 EN Guide Program Number SetExpress Timer Programming Disengage the timer mode Access the Programme Check screenCancel or change a programme Return to the timer modeWhen programmes overlap each other Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyRecording mode Input Connector Input L-1 connector32 EN Press pLoad the disc Pause playbackStart playback PressLocating a Desired Scene Using the DVD Menu Access the DVD menuAccess the PBC menu 34 ENLocating the Start Point of the Item or Skip the Item Zooming36 EN Access the menu Select the timeSelect the subtitle language If you have specified a wrong selectionSelect the audio setting 38 ENAngle Selection Select the view angleVFP function Adjusting the picture quality Sound Effect 3D PhonicHow to Access the On-Screen Bar Access the status barAccess the menu bar 40 ENMenu Bar Functions for SVCD/Video CD/Audio CD During playback, selects the audio language or sound trackDuring playback, selects the subtitle language During Video CD/SVCD playback, selects the audio channelsPrecautions 42 ENOutline Control displayBasic Playback Select the groupControl display appears on the TV screen.  pg Press rt to select the desired group, then press e44 EN Group/File SelectionZooming a still picture Set the unit’s input mode Set the edit modeEngage the Record Pause mode Make connectionsSet the input mode of recording deck Engage the Record Pause mode of the recording deck46 EN Start the source playerDubbing From DVD to VHS48 EN Place a disc and load an MDPrepare the audio device for dubbing For the digital audio deviceChange the remote control code Set the remote control codeTurn off the unit Display the code50 EN Operating a JVC TVOperate the TV Connecting To a Satellite Receiver Satellite receiver52 EN Make connectionsAccess the Mode Set screen Function Set VHS deckPress rt to move the highlight bar pointer to Function SET, then pressSubsidiary Settings 54 ENAuto Splp Timer on / OFF For ExampleMode Set DVD deck Access the DVD Set Up menu screen56 EN Picture Settings Audio SettingsSet this item correctly according to the logo on the device Others Settings 58 ENParental Lock Playback discsCountry/Area Code List for Parental Lock Access the Auto Channel Set screen 60 ENTuner Set Auto Channel SetManual Channel Set 62 EN Delete a ChannelSwap Channel Position Perform tuning Select the channel to fine-tuneSelect the channel FRQ number for the channel starts blinkingSlide to the right You can disable the unit’s operation 64 ENChild Lock Set the Child LockInformation on Multi-System Compatibility VHS deck Off-Air RecordingTV System Recorded tape66 EN Tape-To-Tape EditingRecorded tape Playback equipment Recording circuitPower Tape Transport VHS deckPlayback VHS deck Playback DVD deckInput mode is not correct Set the input mode to L-1 or F-1 68 ENMP3/JPEG Files Playback DVD deck Recording VHS deckTimer Recording VHS deck Timer recording won’t workTUNER/TIMER VHS deck 70 ENVIDEO/AUDIO VHS deck VIDEO/AUDIO DVD deckAuto Channel Set Auto Set Up Connecting To a Dolby Digital Decoder or An AmplifierExpress Timer Programming CODE/SHOWVIEW System SetupHR-XV38SAG/HR-XV38SAS
Top Page Image Contents