JVC 0105KTH-MW-BJ, LPT1016-001A manual Express Timer Programming

Page 29

EN 29

Express Timer

Programming

If you do not know the G-CODEnumber for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.

Before performing Express Timer Programming:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

●Select the appropriate colour system with “PAL/ MESECAM” and “NTSC” ( pg. 54).

Slide to the right.

Example: To timer-record the programme from 21:00 to 22:00 on 25th December, on channel 1.

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

B Access the G-CODE/SHOWVIEWscreen.

Press PROG.

C Access the Programme screen.

Press START +/–. (If you’re just starting out, “P1” appears.)

D Enter the programme start time.

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

F Enter the programme date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.

G Enter the channel position.

Press PR +/–.

H Set the tape speed.

Press p (SP/LP or EP*). * EP is for NTSC only.

I Return to the normal screen.

Press PROG or ENTER. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

●If “PROGRAM OVERLAPPED” appears on the screen, see page 28.

●Repeat steps B – I for each additional programme.

J Engage the unit’s timer mode.

Press #. The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # again.

Image 29

Contents HR-XV38SAG HR-XV38SAS Use only discs marked with the following Safety PrecautionsContents Playable Discs About DiscsUnplayable Discs Region NumberPlacing a Disc File Structure of DiscsCare and Handling of Discs Open the disc trayFront View Tape Remaining Time Indicator pg Satellite Auto Recording Indicator N pgON-SCREEN Display VHS deck Counter Display Tape Speed SP/LP or EP* pgE Button rt Button Enter Button How To UseBasic Connections Check the contentsSituate the unit Connect the unit to TVBack of TV Plug the end of the mains power cord into a mains outlet10 EN Switch the mode Scan Mode SetDVD deck Turn on the unitBack of TV Audio in connectors 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Video ConnectionExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set Set the video channel14 EN Auto Set UpSelect the mode setting Select the modeMonitor Set DVD deck Return to the normal screenLanguage 16 ENSelect the DVD deck Select the mode18 EN Language Code ListTo make corrections anytime during the process Clock SetStart the clock operation Basic Playback 20 ENPlayback Features Instant ReView 22 ENRepeat Playback Manual TrackingBasic Recording Instant Timer Recording ITR Recording Features24 EN Tape Remaining TimeRecording Receiving Stereo and Bilingual ProgrammesPlayback Guide Program Number Set System Setup26 EN Access the G-CODE/SHOWVIEWscreen Timer ProgrammingAccess the G-CODEProgram screen Enter the G-CODEnumberTo Timer-Record Weekly Or Daily Serials Engage the unit’s timer mode28 EN Guide Program Number SetExpress Timer Programming Access the Programme Check screen Disengage the timer modeCancel or change a programme Return to the timer modeCancel or change programme setting When programmes overlap each otherConfirm the overlapping programmes Select the programme to modifyInput Connector Input L-1 connector Recording mode32 EN Press pPause playback Load the discStart playback PressAccess the DVD menu Locating a Desired Scene Using the DVD MenuAccess the PBC menu 34 ENZooming Locating the Start Point of the Item or Skip the Item36 EN Select the time Access the menuSelect the subtitle language If you have specified a wrong selection38 EN Select the audio settingAngle Selection Select the view angleSound Effect 3D Phonic VFP function Adjusting the picture qualityAccess the status bar How to Access the On-Screen BarAccess the menu bar 40 ENDuring playback, selects the audio language or sound track Menu Bar Functions for SVCD/Video CD/Audio CDDuring playback, selects the subtitle language During Video CD/SVCD playback, selects the audio channels42 EN PrecautionsOutline Control displaySelect the group Basic PlaybackControl display appears on the TV screen. pg Press rt to select the desired group, then press eZooming a still picture 44 ENGroup/File Selection Set the edit mode Set the unit’s input modeEngage the Record Pause mode Make connectionsEngage the Record Pause mode of the recording deck Set the input mode of recording deck46 EN Start the source playerFrom DVD to VHS DubbingPlace a disc and load an MD 48 ENPrepare the audio device for dubbing For the digital audio deviceSet the remote control code Change the remote control codeTurn off the unit Display the codeOperate the TV 50 ENOperating a JVC TV Satellite receiver Connecting To a Satellite ReceiverMake connections 52 ENFunction Set VHS deck Access the Mode Set screenPress rt to move the highlight bar pointer to Function SET, then press54 EN Subsidiary SettingsFor Example Auto Splp Timer on / OFF56 EN Mode Set DVD deckAccess the DVD Set Up menu screen Set this item correctly according to the logo on the device Picture SettingsAudio Settings 58 EN Others SettingsParental Lock Playback discsCountry/Area Code List for Parental Lock 60 EN Access the Auto Channel Set screenTuner Set Auto Channel SetManual Channel Set Swap Channel Position 62 ENDelete a Channel Select the channel to fine-tune Perform tuningSelect the channel FRQ number for the channel starts blinking64 EN Slide to the right You can disable the unit’s operationChild Lock Set the Child LockVHS deck Off-Air Recording Information on Multi-System CompatibilityTV System Recorded tapeTape-To-Tape Editing 66 ENRecorded tape Playback equipment Recording circuitTape Transport VHS deck PowerPlayback VHS deck Playback DVD deck68 EN Input mode is not correct Set the input mode to L-1 or F-1MP3/JPEG Files Playback DVD deck Recording VHS deckTimer recording won’t work Timer Recording VHS deck70 EN TUNER/TIMER VHS deckVIDEO/AUDIO VHS deck VIDEO/AUDIO DVD deckConnecting To a Dolby Digital Decoder or An Amplifier Auto Channel Set Auto Set UpExpress Timer Programming CODE/SHOWVIEW System SetupHR-XV38SAG/HR-XV38SAS